I've got the pipe cut and bent to the correct size for $15 but I can't find the brass fittings anywhere. I've tried 11 different places (no joke) and nothing, and I've showed them all pictures of it and no one can help me. One guy at napa said that I could sit down with him and we could look through catalogs. Any help would be greatly appreciated
Even better if you could give me the exact name and stuff.
PLEEEEEEEAAAAAAAASSSSSSSSSSEEEEEEEE

 

The brass fittings for vacuum hose connection you get at home depot or lowes.

They are barbed on one end and male pipe thread on other.

Just take the vacuum hose with you to match. Good luck!

 

I've checked home depot and didn't find it, I even had one of them help look. but I havent looked back there now for a couple of weeks but I dont know if they will have it know either. What if I got a 90 degree fitting with threads on both ends and clamped the hose onto it good? would that work?

 

They are in the plumbing section at Home Depot. I even have the part numbers in my write up. I found that on the earlier model 5VZ's a smaller FPR line then what I list in the write-up works better.