Getting for lift w/ PICS
#1
Registered User
Thread Starter
Join Date: May 2007
Location: San Juan Capistrano
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Getting for lift w/ PICS
I finally ordered a set a Performance Products 1 inch lift springs. I haul heavy loads and travel often and I was tired of sagging rear end. I already have some Bilsteins.
Besides putting the springs on what else should be done. I'm taking it a mechanic that a good friend of mine and knows what he's doing. I took some before pictures and measurements. The springs are going on Friday so check back with lots pictures!
Besides putting the springs on what else should be done. I'm taking it a mechanic that a good friend of mine and knows what he's doing. I took some before pictures and measurements. The springs are going on Friday so check back with lots pictures!
#4
Registered User
Thread Starter
Join Date: May 2007
Location: San Juan Capistrano
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I had my PP 1' coils put on today. I also had my right rear axle seal replaced at the same as that was leaking.
The lift came higher than I expected, especially in the front! I have not driven it much but it seems to handle similiar, maybe a little more body roll.
pics!
I will get some better pictures in better lighting soon. Thanks for the advice everyone as I'm very happy. Maybe in the future I will get some more aggressive tires.
The lift came higher than I expected, especially in the front! I have not driven it much but it seems to handle similiar, maybe a little more body roll.
pics!
I will get some better pictures in better lighting soon. Thanks for the advice everyone as I'm very happy. Maybe in the future I will get some more aggressive tires.
Thread
Thread Starter
Forum
Replies
Last Post
Big Little Bear
Pre 84 Trucks (Build-Up Section)
230
11-13-2023 11:42 AM
justdifferentials
Vendors Build-Ups (Build-Up Section)
14
06-11-2017 08:36 PM
voiddweller
86-95 Trucks & 4Runners (Build-Up Section)
53
02-01-2016 05:46 AM