Hey Everyone,

Tomorrow is THE DAY that the ToyTec OME 3" lift goes on! I have the help lined out to come over and the appt at the shop to have the new springs compressed onto the front shock.... That's why I need help fast.

I have searched, and have not found "exactly" what I want to know, so I'm hoping someone here will know. The instructions aren't really clear as "where" in the mix the spacers go. They say to assemble the front strut with the new springs..... check..... then to place the provided spacer on top of the assembly and put back into the vehicle. My question... does this mean the spacer goes between the top plate and under the shock tower on the frame? OR does it mean between the spring and top plate?

I know, I'm really not very good at explaining it, but I'm hoping that someone with experience with this same lift will tell me what they did.

Thannnnk you!

James

 

assemble new strut/coil assembly on the top plate with the new extended studs. before mounting back on the truck just slide the spacer on top of the top plate and assemble

 

Good Lord man thank you!

This was what my gut was telling me, but I needed verification before I screwed something up.

James

 

not a problem, good luck!

 

Check out:
www.sonoransteel.com/front

and

www.sonoransteel.com/rear

 

Don't forget to get some pics up after the swap. Goodluck!

 

Will Do!

James

 

Depends on what lift you got. Most of them go in between the top plate and the spring. If it has 3 holes drilled in it, then it means it will go on top of the top-plate and below the tower/frame.

Looks like you got the one inbetween the coil and top-plate... AKA "In the pack"

 

looks like? what are you looking at?

 

Thank you for the reply!

But MillerPKA had it right. It is the spacer that has slots that go on top of the studs on top of the spring plate....between the plate and the tower.

It looks like this: http://www.toyteclifts.com/images/pr...Runner-640.jpg


Thanks,

James

 

miller why did you change your name from roorrunner?

 

once upon a time roor paid me to have their sticker on my car but that is no more, and i don't really smoke anymore so it just seemed pointless

back on topic, make sure you're putting pictures up today!

 

Ha, roor as in the the bong company?! Yeah, that reminds me of college. Can't beleive I didn't catch on to that name before.
But to reply to the post, the spacer will go on top of the top plate. Good lift, I've got it on mine and love it!