cupholder mod
May 19, 2003 | 08:50 AM
#2
Registered User
Joined: May 2002
Posts: 10,036
Likes: 5
From: Los Angeles
Toyotaguy,
http://www.4runners.org/articles/cupholder
Basically, you are retrofitting a 99 center console cupholder into the 98 cupholder spot. In short, you are replacing the center console units. There are some 'hacks' you need to do.
I attempted to retrofit Dbui27's 97 4runner Limited, but there were some issues b/c we didn't buy all the parts but tried to retrofit the 99 cupholder into his 98 console. Also, he had the rear heater so that made it more complicated.
Read the article and if you have any questions, write me back. Oh, and troll through the Tech Section. there are some really good write ups in there.
Bob
http://www.4runners.org/articles/cupholder
Basically, you are retrofitting a 99 center console cupholder into the 98 cupholder spot. In short, you are replacing the center console units. There are some 'hacks' you need to do.
I attempted to retrofit Dbui27's 97 4runner Limited, but there were some issues b/c we didn't buy all the parts but tried to retrofit the 99 cupholder into his 98 console. Also, he had the rear heater so that made it more complicated.
Read the article and if you have any questions, write me back. Oh, and troll through the Tech Section. there are some really good write ups in there.
Bob
Thread
Thread Starter
Forum
Replies
Last Post
TheBFA
Solid Axle Swaps, All Years
8
Feb 15, 2020 06:55 AM
voiddweller
86-95 Trucks & 4Runners (Build-Up Section)
53
Feb 1, 2016 05:46 AM
