95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

check engine light

Old Mar 21, 2005 | 04:30 PM
  #1  
ajz399's Avatar
Thread Starter
Registered User
 
Joined: Feb 2005
Posts: 33
Likes: 0
check engine light

1994 4runner ce light came on,I did the diagnostic check and my cruise control and antilock brake lights flash non stop,my ce light stays lit and doesnt blink,WTF?
Reply
Old Mar 21, 2005 | 04:57 PM
  #2  
Marc's Avatar
Contributing Member
 
Joined: Sep 2003
Posts: 1,241
Likes: 13
From: Winnipeg, MB, Canada
Are you sure you're shorting TE1 and E1?
Reply
Old Mar 21, 2005 | 05:03 PM
  #3  
ajz399's Avatar
Thread Starter
Registered User
 
Joined: Feb 2005
Posts: 33
Likes: 0
i did this from a earlier thread-
If you look by the fuse box in your engine bay on the passenger side, there is a small grey box next to it labeled "DIAGNOSTIC". Open that up and you will see a bunch of terminals. There are two terminals you need to jump to pull codes, they are "E1" and "TC". There should be a diagram with labels on the cap IIRC. Jump these with a wire or something that is conductive and watch the blinks when you have the key turned to ON (you have 4 seconds to get from the diagnostic box to the cab where you can see the CEL
Reply
Old Mar 22, 2005 | 07:12 AM
  #4  
Marc's Avatar
Contributing Member
 
Joined: Sep 2003
Posts: 1,241
Likes: 13
From: Winnipeg, MB, Canada
I believe E1 to TC is to test the ABS.
Try TE1 to E1
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bigjstang
86-95 Trucks & 4Runners
21
Jun 2, 2025 03:56 PM
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
Kalihi,HI
86-95 Trucks & 4Runners
3
Jul 9, 2015 04:29 PM
God's Bounty Hunter
Pre 84 Trucks
6
Jul 8, 2015 12:54 PM
colinmil
Newbie Tech Section
2
Jul 6, 2015 04:03 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 08:44 AM.