Broken clutch bracket repair
#1
Registered User
Thread Starter
Join Date: Aug 2004
Location: Prince George,B.C.
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Broken clutch bracket repair
Well I finally got my butt in gear and ripped my clutch bracket out today.
It's been cracked for a while but just recently really started to fall apart.
so I had no choice but to get at it.
Just a few tips if anybody is thinking of doing this themselves.
Take the steering colum out. it's only a few more bolts and will make your life MUCH easier. I didn't when I took the bracket out and cursed and fought
with it . When I put it back in I relented and took out the colum and it was soo much easier.
We ended up reinforcing it a bit when welding the bracket up and it seems much better now. Ideally I think if you could tie the clutch pivot with the brake pivot it would be bullet proof.
All in all a pretty easy job. just a pain as it's in such a crappy spot to get into.
Later,
Scott
It's been cracked for a while but just recently really started to fall apart.
so I had no choice but to get at it.
Just a few tips if anybody is thinking of doing this themselves.
Take the steering colum out. it's only a few more bolts and will make your life MUCH easier. I didn't when I took the bracket out and cursed and fought
with it . When I put it back in I relented and took out the colum and it was soo much easier.
We ended up reinforcing it a bit when welding the bracket up and it seems much better now. Ideally I think if you could tie the clutch pivot with the brake pivot it would be bullet proof.
All in all a pretty easy job. just a pain as it's in such a crappy spot to get into.
Later,
Scott
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
07-14-2020 08:35 PM
whereAreMyPants
86-95 Trucks & 4Runners
2
07-22-2015 03:32 AM
HookahRoo
86-95 Trucks & 4Runners (Build-Up Section)
4
07-20-2015 07:06 PM
jon.r
General Vehicle Related Topics (Non Year Related)
8
07-11-2015 03:34 PM