2009 taco trd springs fit 3rd gen 4runner in front
#1
Registered User
Thread Starter
2009 taco trd springs fit 3rd gen 4runner in front
3RD GEN "1997"
I NEED A LITTLE MORE LIFT AND A FRIEND IS WILLING TO GIVE ME HIS 2009 TACOMA FRONT SPRINGS, WILL THIS WORK AND GIVE LIFT?
THIS MAY BE A DUMB QUESTION HOWEVER I FIGURED IT MIGHT FIT SINCE TOYTECS PAGE SAYS
Eibach front coil spring kit (set of 2) for:
95-04 Tacoma = 3" lift
96-02 4Runner 3" lift
05-10 Tacoma 03-10 4Runner and FJ 1.6" lift
I NEED A LITTLE MORE LIFT AND A FRIEND IS WILLING TO GIVE ME HIS 2009 TACOMA FRONT SPRINGS, WILL THIS WORK AND GIVE LIFT?
THIS MAY BE A DUMB QUESTION HOWEVER I FIGURED IT MIGHT FIT SINCE TOYTECS PAGE SAYS
Eibach front coil spring kit (set of 2) for:
95-04 Tacoma = 3" lift
96-02 4Runner 3" lift
05-10 Tacoma 03-10 4Runner and FJ 1.6" lift
Last edited by drkblu4runner; 09-16-2011 at 10:59 AM. Reason: gen
#2
Registered User
iTrader: (2)
Cut and dry version, not really. It would take some serious modification to make it work. The second gen uses torsion bars whereas the 3rd gens(runners/tacos) use a rack pinion steering set-up. Now a puck lift may fit the coils in the back of a 2nd gen runner from a taco, trying that set up with a 4'' lift right now. Not sure about the coil buckets being the same dimensions though
#3
Registered User
Thread Starter
Cut and dry version, not really. It would take some serious modification to make it work. The second gen uses torsion bars whereas the 3rd gens(runners/tacos) use a rack pinion steering set-up. Now a puck lift may fit the coils in the back of a 2nd gen runner from a taco, trying that set up with a 4'' lift right now. Not sure about the coil buckets being the same dimensions though
you are correct
my title is wrong tho i meant 3rd gen 1997.... im not that much of a noob, come on
#4
Registered User
Thread Starter
anyone???? i cant find anything anyone.. seen tundra trds but not newer tacomas
this shows same spring fitting all..
http://www.toyteclifts.com/index.php...mart&Itemid=72
this shows same spring fitting all..
http://www.toyteclifts.com/index.php...mart&Itemid=72
Trending Topics
#10
Registered User
Thread Starter
they were stock TRD. however i think one side might be higher then the other by half inch or less..... i remember reading that some coils have a left and right.. doesnt bother me as long as it alignment isn't effected much
Thread
Thread Starter
Forum
Replies
Last Post
Gene
Off Road Trip Planning, Expeditions, Trips, & Events
19
06-03-2002 07:07 PM