87hillbillyoter

nice work man. just curioius, what year did you get those jag seats from? and did they bolt in or did you have to make mounts

twistedyota

iTrader: (1)

not sur. but we had to cut the yota brackets off and had to weld them on

87hillbillyoter

ok cool thanks

twistedyota

iTrader: (1)

so i saw ur build thread earlier today and i was curous bout one thing. ur truck is an 87 but it has a 22r? the PO converted it?

87hillbillyoter

no i believe 87 was the last year of factory 22r's

twistedyota

iTrader: (1)

i didnt know tht. learn something everyday

twistedyota

iTrader: (1)

cant wait for tomarrow. everything is still leaning towards me picking up this wrecked yota tomarrow. i hope everything goes well.

on anotjher note i cant decide what to paint my truck.
i may just stay with the grey and mudd look for a while as shown above
or maybe a black with yellow strip

or grey with a black strip

im leaning more towords this do to the fact the black vehicles get really hot and i have leather seats, they dont mix very well.

i may do all yellow like swimmerboy's do to the fact tht i have 2 gal. of yellow road paint and i want to see how it looks but im not tht big of a fan of yellow.

any ideas?

twistedyota

iTrader: (1)

todays the day. i gotta go to school and hang out(tested out wenseday) to get my hours then drive to napa then off to covelo to get the truck hope to be their about 10pm i cant wait=). i hope everything works out

xxxtreme22r

black with a grey stripe might look good.

Yotafisher

x2 on the black with grey stripe.

twistedyota

iTrader: (1)

im just kidding. this is the 85 i picked up. i didnt know it was in this bad of a condition. the front axle is bent. im gonna tear the axle apart and see if the shafts are still good, if so ima buy a housing.

twistedyota

iTrader: (1)

so got the engine,tranny, busted t-case, bent front axle, front springs, rear axle, steering column, gauge cluster, tank, tank skid plate, driver side seat tracks, maf and washer bottle off the truck on mon and tues and had the truck taken to the scrapyard today. got 98.25 for it and the warped block out of the scav.

so i spent 125 in gas to get it and got 98.25 back so far
125.00
-98.25
26.75 is what i have spent now

i just hope the engine is good

87hillbillyoter

man that thing is wrecked! must have rolled it like 14 times or something jeez!

oh and for the paint i like red and black hehe (notice how i painted mine red and black)
haha but really 94toy4x4fever's truck is beautiful. id go with that color
https://www.yotatech.com/forums/f199...thread-202985/

twistedyota

iTrader: (1)

like this?

but the black will be more of a flat black

twistedyota

iTrader: (1)

i was told it hit a ditch and did an endo. but their has to be more then tht.

and i like red and black too but im liking the grey a quite a bit

1981 yota

i like the black and gray it looks good

poor truck or the pile of steel hopefully the front axles are all good

twistedyota

iTrader: (1)

nope the front axle is bent pass. side between pumkin and knuckle

1981 yota

that sucks

twistedyota

iTrader: (1)

yea but ima take everything salvagable off of it then just buy what i need.

1981 yota

looks like its pretty hammered but the radiator looks good