YotaTech Forums

86-95 Trucks & 4Runners (Build-Up Section) Post your build-ups here

Swimmerboy2112's 1995 Toyota 4Runner Build-Up Thread AKA "4Luxury"

Thread Tools
 
Search this Thread
 
Old Apr 3, 2011 | 04:43 AM
  #161  
mfwimg82's Avatar
mfwimg82
Registered User
 
Joined: Mar 2010
Posts: 348
Likes: 0
From: SE PA.
try to go to yard and get one take harness too a little pass where they cut it
Reply
0
Old Apr 3, 2011 | 10:07 AM
  #162  
ChefYota4x4's Avatar
ChefYota4x4
Registered User
iTrader: (5)
 
Joined: Jun 2009
Posts: 19,281
Likes: 20
From: Lake Havasu, AZ
Right on, .........but, ..............poor van! lol

So, you're able to find full harness for that for 60$? Or...... you just need the harness to ECU from the firewall back? Gonna just get an ECU and then wire up your own goodies from there back to the donor ECU you find? W/about the connectors?
Reply
0
Old Apr 3, 2011 | 01:01 PM
  #163  
mfwimg82's Avatar
mfwimg82
Registered User
 
Joined: Mar 2010
Posts: 348
Likes: 0
From: SE PA.
what poor vehicle had the engine in it ?
Reply
0
Old Apr 3, 2011 | 02:04 PM
  #164  
irab88's Avatar
irab88
Registered User
15 Year Member
Liked
iTrader: (4)
 
Joined: Jul 2010
Posts: 6,499
Likes: 37
yeah, brian! tired, i assume? i mean, you did cross the entire state of pennsylvania lengthwise...
Reply
0
Old Apr 3, 2011 | 04:25 PM
  #165  
iamsuprman13's Avatar
iamsuprman13
Registered User
 
Joined: May 2008
Posts: 156
Likes: 0
From: Fort Lewis, WA
sweet, super excited for you man, I bet you are happy to finally have it...
Reply
0
Old Apr 3, 2011 | 07:18 PM
  #166  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by mfwimg82
try to go to yard and get one take harness too a little pass where they cut it
Yeah ill see what i can find

Originally Posted by ChefYota4x4
Right on, .........but, ..............poor van! lol

So, you're able to find full harness for that for 60$? Or...... you just need the harness to ECU from the firewall back? Gonna just get an ECU and then wire up your own goodies from there back to the donor ECU you find? W/about the connectors?
Van!? No sir! It was in a Toyota Highlander, the finest in luxury 4x4 lol

For wiring i think im going to go get the pre-made 3.0 --> 3.4 harness ill just have to grab an ECU from a 98' 4x4 4Runner.

Originally Posted by mfwimg82
what poor vehicle had the engine in it ?
My mom's Toyota Highlander, such a sweet car, smooooooth ride!

Originally Posted by irab88
yeah, brian! tired, i assume? i mean, you did cross the entire state of pennsylvania lengthwise...
Honestly, it was an easy ride, 14hrs total that includes stopping for gas and food plus i met up with an old friend for a few hours, someone to keep me company on the drive.

Originally Posted by iamsuprman13
sweet, super excited for you man, I bet you are happy to finally have it...
Yes just happy to be home! lol
Reply
0
Old Apr 3, 2011 | 07:19 PM
  #167  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
More pics! (cause ya need them).

Took the engine out of my moms Highlander and into my 4Runner!






Reply
0
Old Apr 4, 2011 | 04:14 PM
  #168  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Here is a list of the parts i need for the swap,

3.4 stuff;

Power Steering Pump
Alternator
ECU
Plugs
Wires
Intake System
AFM
A/C
Flywheel
Starter
TPS
Coolant Fitting
Clutch
Throwout Bearing
Pilot Bearing
Pressure Plate
Exhaust
Headers
3.0 --> 3.4 Wiring Connection
3.4 Wiring Harness
Last edited by Swimmerboy2112; Apr 5, 2011 at 01:48 AM.
Reply
0
Old Apr 4, 2011 | 07:29 PM
  #169  
ChefYota4x4's Avatar
ChefYota4x4
Registered User
iTrader: (5)
 
Joined: Jun 2009
Posts: 19,281
Likes: 20
From: Lake Havasu, AZ
Originally Posted by Swimmerboy2112
Here is a list of the parts i need for the swap,

3.4 stuff;

Power Steering Pump
Alternator
ECU
Plugs
Wires
Intake System
AFM
A/C
Flywheel
Starter
TPS
Coolant Fitting
Clutch
Throwout Bearing
Pilot Bearing
Pressure Plate
Exhaust
FHEWWWWWWWWW! ...glad you got that motor for cheap, Brian! You'll piece it together at the best deal possible, bud, don't worry! Gonna hit the yard for some of this off a Low mile roll/wreck?
Reply
0
Old Apr 5, 2011 | 12:47 AM
  #170  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by ChefYota4x4
FHEWWWWWWWWW! ...glad you got that motor for cheap, Brian! You'll piece it together at the best deal possible, bud, don't worry! Gonna hit the yard for some of this off a Low mile roll/wreck?
Yeah us East coast guys are all getting together on the 16th for a yard-attack to pick and pull what we can, i'll gather a lot of my parts then.
Reply
0
Old Apr 5, 2011 | 12:58 AM
  #171  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Look even with a 5VZE in the back, NO SAG!

Reply
0
Old Apr 5, 2011 | 01:30 AM
  #172  
mfwimg82's Avatar
mfwimg82
Registered User
 
Joined: Mar 2010
Posts: 348
Likes: 0
From: SE PA.
clutch and flywheel at napa under $250 that is 5 things off the list
Reply
0
Old Apr 5, 2011 | 01:48 AM
  #173  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by mfwimg82
clutch and flywheel at napa under $250 that is 5 things off the list
Yeah i plan on stopping there today.
Reply
0
Old Apr 5, 2011 | 07:45 AM
  #174  
jason in tn's Avatar
jason in tn
Registered User
 
Joined: Aug 2009
Posts: 2,173
Likes: 0
From: hohenwald tn.
sharp runner man good luck with the swap
Reply
0
Old Apr 5, 2011 | 01:47 PM
  #175  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by jason in tn
sharp runner man good luck with the swap
Thank you. Lord knows i need it.
Reply
0
Old Apr 6, 2011 | 01:34 PM
  #176  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Finding these parts is more difficult than expected...
Reply
0
Old Apr 8, 2011 | 12:19 PM
  #177  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Picked these up yesterday! Not sure wether to put them on this or my 86'
Reply
0
Old Apr 8, 2011 | 06:15 PM
  #178  
irab88's Avatar
irab88
Registered User
15 Year Member
Liked
iTrader: (4)
 
Joined: Jul 2010
Posts: 6,499
Likes: 37
put 'em on your 95. i think they'll look better there. imo, anyway...
Reply
0
Old Apr 8, 2011 | 08:10 PM
  #179  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by irab88
put 'em on your 95. i think they'll look better there. imo, anyway...

Yeah that's what i'm gonna do, and put the black wheels on the 86'
Reply
0
Old Apr 12, 2011 | 01:34 PM
  #180  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Got some parts today!

Wiring harness


ECU, out of an auto... I thought i specified manual only...
Reply
0



Advanced Search

All times are GMT -8. The time now is 04:29 PM.