Swimmerboy2112's 1991 Pickup Build Thread
#241
On Brandon's, only had to hammer a slight bit on the weld.....in the dark....in the snow. probably coulda been alot more precise if we could have seen what we were doing. and his are 33x 12.5's and stock front suspension. I know that the amount of rub is quite individual based on if they are 12.5's or 10.5's and the amount of offset from the wheels. so, in my opinion, it can be done with little or no modification. gearing is another story though.
And yeah I think you're absolutely right, a lot of it depends on the wheel offset and tire with. But with 10.5's it should be a lot easier to fit than if I tried to fit 33x12.5's
#243
YotaTech Milestone-Two Millionth Post
Is this what you guys went with for header studs?
http://www.lceperformance.com/Header...-p/1045030.htm
http://www.lceperformance.com/Header...-p/1045030.htm
yes..
#252
Registered User
#258
YotaTech Milestone-Two Millionth Post
Brian....so is it a different diameter??? or is this something that can hook to your catalytic converter as-is? I scored a cheap exhaust https://www.yotatech.com/forums/f105...ek-com-240667/ and am pleased with it very much.
#259
Brian....so is it a different diameter??? or is this something that can hook to your catalytic converter as-is? I scored a cheap exhaust https://www.yotatech.com/forums/f105...ek-com-240667/ and am pleased with it very much.
I saw that, but I'm gonna need something with 2.25" piping to match the header.