YotaTech Forums

86-95 Trucks & 4Runners (Build-Up Section) Post your build-ups here

Swimmerboy2112's 1991 Pickup Build Thread

Thread Tools
 
Search this Thread
 
Old Oct 4, 2011 | 02:53 AM
  #241  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by 92 TOY
On Brandon's, only had to hammer a slight bit on the weld.....in the dark....in the snow. probably coulda been alot more precise if we could have seen what we were doing. and his are 33x 12.5's and stock front suspension. I know that the amount of rub is quite individual based on if they are 12.5's or 10.5's and the amount of offset from the wheels. so, in my opinion, it can be done with little or no modification. gearing is another story though.
Lol why in the dark and in the snow? lol

And yeah I think you're absolutely right, a lot of it depends on the wheel offset and tire with. But with 10.5's it should be a lot easier to fit than if I tried to fit 33x12.5's
Reply
0
Old Oct 4, 2011 | 03:13 AM
  #242  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Is this what you guys went with for header studs?

http://www.lceperformance.com/Header...-p/1045030.htm
Reply
0
Old Oct 4, 2011 | 03:40 AM
  #243  
92 TOY's Avatar
92 TOY
YotaTech Milestone-Two Millionth Post
 
Joined: Jan 2009
Posts: 12,009
Likes: 122
From: Northeast Pennsylvania
Originally Posted by Swimmerboy2112
Lol why in the dark and in the snow? lol

And yeah I think you're absolutely right, a lot of it depends on the wheel offset and tire with. But with 10.5's it should be a lot easier to fit than if I tried to fit 33x12.5's
because it got dark and was snowing by the time we were done. it was an 11 hour ordeal to change his suspension. but it took 14hrs to get Joe's motor back together and running. so, i think i owe him again.


Originally Posted by Swimmerboy2112
Is this what you guys went with for header studs?

http://www.lceperformance.com/Header...-p/1045030.htm

yes..
Reply
0
Old Oct 4, 2011 | 04:37 AM
  #244  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by 92 TOY
because it got dark and was snowing by the time we were done. it was an 11 hour ordeal to change his suspension. but it took 14hrs to get Joe's motor back together and running. so, i think i owe him again.





yes..
Oh man 11 hours plus cold plus dark, not fun... Took me a while to do my lift on Ol Yeller too.

And great, I'll order up the studs today!
Reply
0
Old Oct 4, 2011 | 10:42 AM
  #245  
ChefYota4x4's Avatar
ChefYota4x4
Registered User
iTrader: (5)
 
Joined: Jun 2009
Posts: 19,281
Likes: 20
From: Lake Havasu, AZ
Originally Posted by Swimmerboy2112
And great, I'll order up the studs today!
WOOT! lol. KILL IT!
Reply
0
Old Oct 4, 2011 | 03:50 PM
  #246  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by ChefYota4x4
WOOT! lol. KILL IT!
Studs ordered! And got my gasket today at NAPA.
Reply
0
Old Oct 5, 2011 | 03:11 AM
  #247  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
So it turns out my headers did come!


...... To my old address in NJ 2 hours away ......

Gonna have to play fetch.
Reply
0
Old Oct 5, 2011 | 06:36 AM
  #248  
MaK92-4RnR's Avatar
MaK92-4RnR
Registered User
 
Joined: Mar 2008
Posts: 6,059
Likes: 101
From: Sacramento, CA
so you're putting headers on the pick up but not the 4Runner?
Reply
0
Old Oct 5, 2011 | 09:11 AM
  #249  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by MaK92-4RnR
so you're putting headers on the pick up but not the 4Runner?
The 4Runner will get headers soon. First the black truck!
Reply
0
Old Oct 6, 2011 | 10:53 AM
  #250  
westjohns yota's Avatar
westjohns yota
Registered User
 
Joined: May 2011
Posts: 1,751
Likes: 0
From: pensacola FL
haha lovein how it looks brian, whats next? sas???
Reply
0
Old Oct 6, 2011 | 06:16 PM
  #251  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by westjohns yota
haha lovein how it looks brian, whats next? sas???
Thanks man!!! I'd LOVE to SAS but im gonna keep her a DD for now. Going to be picking up another Yota soon stay tuned!

Next for this guy is probably going to be 33 x 10.5's
Reply
0
Old Oct 6, 2011 | 07:09 PM
  #252  
1986yota4x4's Avatar
1986yota4x4
Registered User
 
Joined: May 2011
Posts: 683
Likes: 0
From: arlington oregon
Originally Posted by Swimmerboy2112
Thanks man!!! I'd LOVE to SAS but im gonna keep her a DD for now. Going to be picking up another Yota soon stay tuned!

Next for this guy is probably going to be 33 x 10.5's

another? your a tease
Reply
0
Old Oct 6, 2011 | 07:12 PM
  #253  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by 1986yota4x4
another? your a tease
That I am! and i cant say no to a good deal!
Reply
0
Old Oct 6, 2011 | 07:20 PM
  #254  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Look what I got today!!



HOLY CRAP! That flange is thick!! I should never have to worry about warping


Where's a good place to get a nice 2.25" exhaust?
Reply
0
Old Oct 6, 2011 | 07:31 PM
  #255  
ChefYota4x4's Avatar
ChefYota4x4
Registered User
iTrader: (5)
 
Joined: Jun 2009
Posts: 19,281
Likes: 20
From: Lake Havasu, AZ
Hey! lol.... Yeah, it's like the Presidents limo/thick, WAS I RIGHT????? hahaha...

Enjoy the 'throaty', homie! Can't wait for your report on it... maybe video, and def. pics!
Reply
0
Old Oct 6, 2011 | 08:11 PM
  #256  
1986yota4x4's Avatar
1986yota4x4
Registered User
 
Joined: May 2011
Posts: 683
Likes: 0
From: arlington oregon
nice header, so when are you going to reveal the new toy?
Reply
0
Old Oct 7, 2011 | 02:32 AM
  #257  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by ChefYota4x4
Hey! lol.... Yeah, it's like the Presidents limo/thick, WAS I RIGHT????? hahaha...

Enjoy the 'throaty', homie! Can't wait for your report on it... maybe video, and def. pics!
Yes as soon as i find a suitable exhaust I will install the header!

Originally Posted by 1986yota4x4
nice header, so when are you going to reveal the new toy?
Thanks! and when I pick her up, most likely this weekend.
Reply
0
Old Oct 7, 2011 | 03:08 AM
  #258  
92 TOY's Avatar
92 TOY
YotaTech Milestone-Two Millionth Post
 
Joined: Jan 2009
Posts: 12,009
Likes: 122
From: Northeast Pennsylvania
Brian....so is it a different diameter??? or is this something that can hook to your catalytic converter as-is? I scored a cheap exhaust https://www.yotatech.com/forums/f105...ek-com-240667/ and am pleased with it very much.
Reply
0
Old Oct 7, 2011 | 05:45 AM
  #259  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by 92 TOY
Brian....so is it a different diameter??? or is this something that can hook to your catalytic converter as-is? I scored a cheap exhaust https://www.yotatech.com/forums/f105...ek-com-240667/ and am pleased with it very much.
Jerry,

I saw that, but I'm gonna need something with 2.25" piping to match the header.
Reply
0
Old Oct 7, 2011 | 05:47 AM
  #260  
92 TOY's Avatar
92 TOY
YotaTech Milestone-Two Millionth Post
 
Joined: Jan 2009
Posts: 12,009
Likes: 122
From: Northeast Pennsylvania
Ok...
Reply
0



Advanced Search

All times are GMT -8. The time now is 09:20 AM.