YotaTech Forums

86-95 Trucks & 4Runners (Build-Up Section) Post your build-ups here

Swimmerboy2112's 1986 4Runner Build-Up Thread

Thread Tools
 
Search this Thread
 
Old May 3, 2011 | 07:40 AM
  #2581  
irab88's Avatar
irab88
Registered User
15 Year Member
Liked
iTrader: (4)
 
Joined: Jul 2010
Posts: 6,499
Likes: 37
i keep forgetting you guys have 4runners. plenty of protected space in the rear
Reply
0
Old May 3, 2011 | 11:52 AM
  #2582  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by RBX
My plan is to connect it directly to the battery, after a circuit breaker then fuse, so i can activate it with a switch, and make it easier to tie an air-locking-diff into later.
I already have the power run to my OBA location in the rear.
I am doing the same thing. Not sure about both a circuit breaker and fuse though. I think a fuse or circuit breaker should be sufficient.

Originally Posted by irab88
i keep forgetting you guys have 4runners. plenty of protected space in the rear
4Runners make me smile
Reply
0
Old May 4, 2011 | 02:55 PM
  #2583  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
New stoppers, T-100 rotors, T-100 calipers (not pictured coming in tomorrow), T-100 brake pads (not pictured coming in tomorrow) and a 1" bore master cylinder (not pictured, being shipped as we speak)!




Also, got my compressor today!!!
Reply
0
Old May 4, 2011 | 03:11 PM
  #2584  
irab88's Avatar
irab88
Registered User
15 Year Member
Liked
iTrader: (4)
 
Joined: Jul 2010
Posts: 6,499
Likes: 37
i'm seriously thinking about getting one of those compressers... looks nice
Reply
0
Old May 4, 2011 | 03:18 PM
  #2585  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by irab88
i'm seriously thinking about getting one of those compressers... looks nice
It's awesome! Check out these specs!

1 HP
3.4 CFM
Max PSI: 150
Work PSI: 135
Tank Capacity: 2gal
12V DC
Reply
0
Old May 4, 2011 | 08:25 PM
  #2586  
irab88's Avatar
irab88
Registered User
15 Year Member
Liked
iTrader: (4)
 
Joined: Jul 2010
Posts: 6,499
Likes: 37
have you fired it up yet? i'm interested in how much noise it makes, the duty cycle for normal tire inflation, time to tank pressurization, etc. i'm assuming it's oil-less?
Reply
0
Old May 5, 2011 | 02:07 AM
  #2587  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by irab88
have you fired it up yet? i'm interested in how much noise it makes, the duty cycle for normal tire inflation, time to tank pressurization, etc. i'm assuming it's oil-less?
Haven't gotten a chance to fire her up yet. But yes it is oil-less.
Reply
0
Old May 5, 2011 | 12:46 PM
  #2588  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
T-100 calipers & pads also (not pictured) is a 30A circuit breaker for my compressor.

Reply
0
Old May 5, 2011 | 02:25 PM
  #2589  
RBX's Avatar
RBX
Registered User
15 Year Member
 
Joined: Jan 2010
Posts: 3,795
Likes: 33
From: Bloodymore
Very nice
Reply
0
Old May 5, 2011 | 03:06 PM
  #2590  
irab88's Avatar
irab88
Registered User
15 Year Member
Liked
iTrader: (4)
 
Joined: Jul 2010
Posts: 6,499
Likes: 37
beef.

you planning on brake-checking a semi with those things? jeez they're big
Reply
0
Old May 5, 2011 | 03:28 PM
  #2591  
xxxtreme22r's Avatar
xxxtreme22r
Registered User
 
Joined: Aug 2009
Posts: 13,574
Likes: 72
From: Wilkes-Barre, PA, USA
Nice Brain, it's one thing that i regret not doing when I did my brakes and rotors. Do yourself a favor though, that pedal is gonna "feel" a little hard and/or grab a little high with the signal diaphram booster. Get yourself the dual. I put the t-00 master in mine when I still had the single so I know what the pedal felt like.
Reply
0
Old May 5, 2011 | 04:55 PM
  #2592  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by RBX
Very nice
Hahah!

Originally Posted by irab88
beef.

you planning on brake-checking a semi with those things? jeez they're big
Yeah they are pretty beefy!

Originally Posted by xxxtreme22r
Nice Brian, it's one thing that i regret not doing when I did my brakes and rotors. Do yourself a favor though, that pedal is gonna "feel" a little hard and/or grab a little high with the single diaphram booster. Get yourself the dual. I put the t-100 master in mine when I still had the single so I know what the pedal felt like.
Where's the best place to find the dual?
Reply
0
Old May 5, 2011 | 04:57 PM
  #2593  
xxxtreme22r's Avatar
xxxtreme22r
Registered User
 
Joined: Aug 2009
Posts: 13,574
Likes: 72
From: Wilkes-Barre, PA, USA
Junk yard. That's where I got mine at.
Reply
0
Old May 5, 2011 | 04:58 PM
  #2594  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by xxxtreme22r
Junk yard. That's where I got mine at.
Ah forgot about that! There is a yard that pulls parts for ya about 1.5 mi from my house.
Reply
0
Old May 5, 2011 | 05:01 PM
  #2595  
xxxtreme22r's Avatar
xxxtreme22r
Registered User
 
Joined: Aug 2009
Posts: 13,574
Likes: 72
From: Wilkes-Barre, PA, USA
If ya can't find one, I'll yank one up here for ya, if ya give me those black 15 x 8's ya got.

Oh and stupid question, do those t-100 calipers clear 15's ?
Reply
0
Old May 5, 2011 | 05:07 PM
  #2596  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by xxxtreme22r
If ya can't find one, I'll yank one up here for ya, if ya give me those black 15 x 8's ya got.

Oh and stupid question, do those t-100 calipers clear 15's ?
haha

I asked Corax (he wrote the DIY) and he said it clears his 15's and if it doesn't clear mine, i'll just throw on the 16's hahaha
Reply
0
Old May 5, 2011 | 09:04 PM
  #2597  
ChefYota4x4's Avatar
ChefYota4x4
Registered User
iTrader: (5)
 
Joined: Jun 2009
Posts: 19,281
Likes: 20
From: Lake Havasu, AZ
You'll be stoppin in a "toss you through the windshield" manner, soon! hahaha. Congratz, Brian
Reply
0
Old May 6, 2011 | 01:28 AM
  #2598  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by ChefYota4x4
You'll be stoppin in a "toss you through the windshield" manner, soon! hahaha. Congratz, Brian
That's the kinda stopping power i'm looking for!
Reply
0
Old May 6, 2011 | 01:29 AM
  #2599  
Swimmerboy2112's Avatar
Swimmerboy2112
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Well today is the 1yr anniversary of when i got my truck, and it also happens to be my 20th b-day!
Reply
0
Old May 6, 2011 | 02:29 AM
  #2600  
92 TOY's Avatar
92 TOY
YotaTech Milestone-Two Millionth Post
 
Joined: Jan 2009
Posts: 12,009
Likes: 122
From: Northeast Pennsylvania
happy B-day man
Reply
0



Advanced Search

All times are GMT -8. The time now is 08:33 AM.