I got out this weekend and took a few pics at Dad's Cabin...almost got stuck in the creek.

 

 

Well....a couple of weeks ago I got sideswiped in a parking lot (came out to a banged up rear quarter). It was not a bad bump but it was enough to irritate me.....dang chicken ran too:



I got the fender straight and got the paint buffed up. I took the chrome trim off because it was all bent up and it looks allot better:

 

Nice job! I took my chrome trim off too, looks so much cleaner in my opinion.

 

I swapped out my hubs today......and noticed something bad:

 

Anybody know where I can get some center caps that will work with it???

 

your rig is lookin great man. nice work. is your rig auto or standard? im interested to know your gains and how the install for the headers was if it was auto.

 

My 4Runner is an auto...as far as gains...it feels faster and definitely sounds faster.

It was much easier to install the exhaust than to remove the factory manifold and cross over!

It took less than 12 hours from heads to the tip.

 

Lookin good man...How did the hub install go? I'll be doing mine someday, probably won't be able to get to it till the spring.

 

It was very strait forward Lumpy....the only thing is make sure you have the gaskets before you start. I didn't get mine and when I pulled the old ADD hubs there were no gaskets. I guess the last time the bearings were done it wasn't worth reinstalling them. Fortunately, the local Toyota had a bag of 9 and sold them to me for $1.75 each.

 

I changed my Brake Fluid on Saturday.....I installed my speed bleeders and it made it an easy job! The old Fluid was ready to go, I think it was pretty much used up!

 

nice build brother...just bought a 93 4runner, and i cant wait to have some free time to start working on it...