86-95 Trucks & 4Runners (Build-Up Section) Post your build-ups here

Clocklaw's 1995 4Runner Build-Up Thread

Thread Tools
 
Search this Thread
 
Old Mar 14, 2010 | 05:41 PM
  #41  
clocklaw's Avatar
Thread Starter
Registered User
 
Joined: Dec 2009
Posts: 436
Likes: 0
From: Columbia Tennessee...that's 10EC


Reply
Old Mar 14, 2010 | 05:41 PM
  #42  
clocklaw's Avatar
Thread Starter
Registered User
 
Joined: Dec 2009
Posts: 436
Likes: 0
From: Columbia Tennessee...that's 10EC


Reply
Old Apr 9, 2010 | 10:39 AM
  #43  
clocklaw's Avatar
Thread Starter
Registered User
 
Joined: Dec 2009
Posts: 436
Likes: 0
From: Columbia Tennessee...that's 10EC
Cleaned up the 4runner Sunday....probably the cleanest it has been in some time and the cleanest it will be for some time to come!



Reply
Old Apr 24, 2010 | 09:46 AM
  #44  
clocklaw's Avatar
Thread Starter
Registered User
 
Joined: Dec 2009
Posts: 436
Likes: 0
From: Columbia Tennessee...that's 10EC
Fitted some new rubber today. I went with 31X10.5 (factory size) and it looks pretty good. Storms are running through here today so I will have to get some better pictures later.



Reply
Old Apr 26, 2010 | 10:14 AM
  #45  
NYChopshop's Avatar
Registered User
 
Joined: Oct 2008
Posts: 468
Likes: 0
From: Back in New York City!
fan-friggin-tastic 'runner man! The exhaust sounds great, and bonus points for stealin my tail lights! hah! Nothin like ditching the amber lenses on a truck thats so undeniably red! Keep up the good work on keeping it on the road! May she run for a million more miles.
Reply
Old Apr 26, 2010 | 10:31 AM
  #46  
malteserunner's Avatar
Contributing Member
iTrader: (1)
 
Joined: Sep 2006
Posts: 1,537
Likes: 0
From: Ca
Very nice work! I love the way the exhaust looks and sounds. The tires look great as well! Keep it up.
Reply
Old Apr 27, 2010 | 08:13 AM
  #47  
clocklaw's Avatar
Thread Starter
Registered User
 
Joined: Dec 2009
Posts: 436
Likes: 0
From: Columbia Tennessee...that's 10EC
Thanks guys, I am really pleased with it overall. Still have a few things to fix and a few FARKLES to add.

Anyone know anything about the power antenna? I think the p.o. replaced the factory power with a cheap aftermarket. It growns and growels when it goes up and down and to be honest, with the reception it is pretty much worthless! I am considering a swap for a stationary antenna with a mast I can remove when I need to.
Reply
Old May 1, 2010 | 02:26 PM
  #48  
clocklaw's Avatar
Thread Starter
Registered User
 
Joined: Dec 2009
Posts: 436
Likes: 0
From: Columbia Tennessee...that's 10EC
I have to tell everyone, I am really starting to get tired of pushing this damn truck.

I think the coil or igniter failed.....just died on the interstate and will not start now.

Last edited by clocklaw; May 2, 2010 at 12:38 AM.
Reply
Old May 1, 2010 | 10:24 PM
  #49  
malteserunner's Avatar
Contributing Member
iTrader: (1)
 
Joined: Sep 2006
Posts: 1,537
Likes: 0
From: Ca
Check the wire to your pick up coil. My last 3vze died like that, and sure enough it was an intermittent short in wire to the pick up. Good luck.
Reply
Old May 2, 2010 | 12:39 AM
  #50  
clocklaw's Avatar
Thread Starter
Registered User
 
Joined: Dec 2009
Posts: 436
Likes: 0
From: Columbia Tennessee...that's 10EC
Originally Posted by malteserunner
Check the wire to your pick up coil. My last 3vze died like that, and sure enough it was an intermittent short in wire to the pick up. Good luck.
I re-read my statement and noticed that I said it will start. It will not start, has not hit a lick since it quit today. I will keep the wiring in mind, I hope it's not that.
Reply
Old May 18, 2010 | 08:35 PM
  #51  
clocklaw's Avatar
Thread Starter
Registered User
 
Joined: Dec 2009
Posts: 436
Likes: 0
From: Columbia Tennessee...that's 10EC
If I only had a brain....replaced the Engine Control Module from a donor vehicle.....it's ALIVE again!





Reply
Old May 24, 2010 | 04:48 PM
  #52  
samster0077's Avatar
Registered User
 
Joined: May 2010
Posts: 27
Likes: 0
Great looking truck!
Reply
Old May 24, 2010 | 05:35 PM
  #53  
yotarob2005's Avatar
Registered User
 
Joined: Jan 2010
Posts: 1,803
Likes: 14
From: Bryan Tx,
Originally Posted by samster0077
Great looking truck!
This is one of my favorite builds, keeping it mild, but still very nice
Reply
Old May 24, 2010 | 06:53 PM
  #54  
clocklaw's Avatar
Thread Starter
Registered User
 
Joined: Dec 2009
Posts: 436
Likes: 0
From: Columbia Tennessee...that's 10EC
Thanks guys....it really means allot. The Scarecrow is not a beast....but it is really starting to become the tool I need. I wired in the trailer wiring tonight after work, so I can pull the motorcycle / 4Wheeler trailers.
Reply
Old May 24, 2010 | 08:13 PM
  #55  
Sal's Avatar
Sal
Registered User
 
Joined: May 2010
Posts: 84
Likes: 0
Originally Posted by clocklaw
Thanks guys....it really means allot. The Scarecrow is not a beast....but it is really starting to become the tool I need. I wired in the trailer wiring tonight after work, so I can pull the motorcycle / 4Wheeler trailers.
Great build Clocklaw! You have inspired me to pull the trigger on the long block. Hope you'll be around for questions in a few weeks.
Reply
Old May 24, 2010 | 08:53 PM
  #56  
peow130's Avatar
Registered User
 
Joined: Sep 2008
Posts: 3,887
Likes: 16
From: Spokane, WA
Very VERY clean truck.
Not very often that you see a runner in THAT good of condition.
Reply
Old May 27, 2010 | 05:21 AM
  #57  
clocklaw's Avatar
Thread Starter
Registered User
 
Joined: Dec 2009
Posts: 436
Likes: 0
From: Columbia Tennessee...that's 10EC
A friend of mine has been looking at striping my 4Runner....tell me what you think of this one:


Last edited by clocklaw; May 28, 2010 at 11:11 AM.
Reply
Old May 27, 2010 | 06:16 AM
  #58  
yotarob2005's Avatar
Registered User
 
Joined: Jan 2010
Posts: 1,803
Likes: 14
From: Bryan Tx,
I can't see your pic, but check out these strip kits.

http://www.jamesdeancreations.com/toyota.htm
Reply
Old May 28, 2010 | 11:12 AM
  #59  
clocklaw's Avatar
Thread Starter
Registered User
 
Joined: Dec 2009
Posts: 436
Likes: 0
From: Columbia Tennessee...that's 10EC
I re-hosted the picture from another site, maybe it will be easier to see it....as for the factory stripes, they are still in good shape on the Scarecrow.
Reply
Old May 28, 2010 | 02:21 PM
  #60  
91_TOYOTA_4x4's Avatar
Registered User
 
Joined: Mar 2009
Posts: 1,459
Likes: 1
From: B.C. Canada
im not into grafix and stuff but i like what u have there. looks cool and sure why not go with it!
Reply



All times are GMT -8. The time now is 12:44 AM.