904_runner's 1990 4Runner Build-Up Thread
Apr 9, 2009 | 09:24 PM
#364
Thread Starter
Registered User
Joined: Mar 2008
Posts: 3,870
Likes: 4
From: Chico, California
Thank you!
yea i still have to do some work though. Finish up the exhaust leaks, wire up the tach, find out why the coolant temp sensor isn't working properly, finalize the wiring, run a nice starter wire to the starter relay....
yea i still have to do some work though. Finish up the exhaust leaks, wire up the tach, find out why the coolant temp sensor isn't working properly, finalize the wiring, run a nice starter wire to the starter relay....
Apr 13, 2009 | 05:55 PM
#365
Thread Starter
Registered User
Joined: Mar 2008
Posts: 3,870
Likes: 4
From: Chico, California
Okay guys just got my tach working. Just soldered on the resistor.
FYI i read somewhere i cannot remember where, but people were saying if you ran your truck without doing the tach mod you would blow out your tach.. Well this is wrong. Ive put 200 miles on my rig until now, and the tach works.
Idles at 700..
FYI i read somewhere i cannot remember where, but people were saying if you ran your truck without doing the tach mod you would blow out your tach.. Well this is wrong. Ive put 200 miles on my rig until now, and the tach works.
Idles at 700..
Apr 15, 2009 | 07:10 AM
#372
Thread Starter
Registered User
Joined: Mar 2008
Posts: 3,870
Likes: 4
From: Chico, California
Oh Thanks, 
Well since you know all about the terrain i was on, please tell me how "flat" it was and the proper line i should have taken
Well since you know all about the terrain i was on, please tell me how "flat" it was and the proper line i should have taken
Last edited by 904_runner; Apr 15, 2009 at 08:09 AM.
Apr 15, 2009 | 07:44 AM
#374
Thread Starter
Registered User
Joined: Mar 2008
Posts: 3,870
Likes: 4
From: Chico, California
scuba if you get on chat ill post a vid of the damage..
The flop was VERY SLOW.... The front fender is dented, the driver door is dented and there is a dent above the driver side tail light. Thats really it,. besides my missing mirror and tons of scratches.
I am looking for a new fender/door/mirror though.. ill put those on, maybe ill make half doors out of the old doors if i get another set.
That hill was VERY steep, the photos do not do justice.
The flop was VERY SLOW.... The front fender is dented, the driver door is dented and there is a dent above the driver side tail light. Thats really it,. besides my missing mirror and tons of scratches.
I am looking for a new fender/door/mirror though.. ill put those on, maybe ill make half doors out of the old doors if i get another set.
That hill was VERY steep, the photos do not do justice.
Apr 15, 2009 | 08:27 AM
#377
Registered User
Joined: Mar 2007
Posts: 1,209
Likes: 0
From: Fairbanks Ak
i just would go sideways down the hill. 
It was just a poke in the ribs, to be honest i did the same to my tuck and it was on flat ground. The hill looks hella steep, and i think i did poke to hard.
It was just a poke in the ribs, to be honest i did the same to my tuck and it was on flat ground. The hill looks hella steep, and i think i did poke to hard.
Apr 15, 2009 | 08:46 AM
#380
Thread Starter
Registered User
Joined: Mar 2008
Posts: 3,870
Likes: 4
From: Chico, California
THANKS..
I was very lucky it didn't go over......
I didn't break any glass, but i don't have any pics of the damage at the moment ill grab a couple when i get home.. ITs not bad though i got off very lucky!
I was very lucky it didn't go over......
I didn't break any glass, but i don't have any pics of the damage at the moment ill grab a couple when i get home.. ITs not bad though i got off very lucky!
