Notices
The Classifieds GraveYard Where old classifieds threads go that are too good to let go

Tundra 2WD TRD front coils and shocks

Thread Tools
 
Search this Thread
 
Old Mar 18, 2007 | 03:50 PM
  #1  
RumRunner's Avatar
Thread Starter
Registered User
 
Joined: Jul 2006
Posts: 8
Likes: 0
Tundra 2WD TRD front coils and shocks

As you may have read, my 4Runner was rolled and totaled a month ago. After searching for another 4Runner, I have decided to get a new FJ, therefore I am offering the front Tundra TRD coils/shocks for sale.

The color codes are orange/orange and red/orange. The shocks are yellow Billies. These are complete,assembled units with Tundra top plates. These pretty much new take-off equipment since the PO had Donahoes installed immediately after purchase.

Shipping from CA to MD was $55 when I bought them. I will ship them but keep the cost in mind. These are going to go for best offer over $50. I will take offers through Wednesday so I can get them shipped by Friday if someone uses PayPal.

--
Stash
Old Mar 19, 2007 | 11:16 AM
  #2  
SnoViking's Avatar
Contributing Member
 
Joined: Sep 2005
Posts: 798
Likes: 0
From: Reading PA
Do these give any lift? or just stock height? Im out of the game a bit?

If theyre the same as the tundra d-cab lift setup let me know and Ill make an offer.

Pat
Old Mar 20, 2007 | 04:49 PM
  #3  
96Blurple's Avatar
Registered User
 
Joined: Mar 2007
Posts: 24
Likes: 0
From: SOCal
will these fit my 96 tacoma!?
Old Mar 20, 2007 | 07:45 PM
  #4  
BajaRunner's Avatar
Contributing Member
 
Joined: Apr 2004
Posts: 7,122
Likes: 6
From: 5th Gen San Diegan, California
Originally Posted by 96Blurple
will these fit my 96 tacoma!?
Yes they will.
Old Mar 20, 2007 | 08:44 PM
  #5  
namekim99's Avatar
Registered User
 
Joined: Dec 2005
Posts: 90
Likes: 0
I don't think that the tundra top plates will work. I have some tundra top plates that came with my coils that I bought from a junkyard, and they are set a little bigger than 4runner ones. but it may depend on the year.
Old Mar 22, 2007 | 03:40 PM
  #6  
98SR5's Avatar
Contributing Member
 
Joined: Jun 2004
Posts: 46
Likes: 0
From: San Diego
Smile

I used the Top Plate from my 4Runner and also took the studs from the Tundra Top plate and put them on the 4Runner Top Plate for possible future Bamachem Spacer.

Mike
Old Mar 23, 2007 | 08:13 PM
  #7  
RumRunner's Avatar
Thread Starter
Registered User
 
Joined: Jul 2006
Posts: 8
Likes: 0
Sorry guys, I got busy at work this week. These are from a Double Cab TRD 2WD Tundra. I still have them if anyone is interested.
Old Apr 2, 2007 | 05:35 PM
  #8  
evN86's Avatar
Registered User
 
Joined: Oct 2006
Posts: 9
Likes: 0
From: Orlando, Florida
i might be interested, how much of a lift will it give my 02 4runner if any at all?
Old Apr 15, 2007 | 07:25 PM
  #9  
atl4runner's Avatar
Registered User
 
Joined: Jan 2006
Posts: 49
Likes: 0
so if i have a 2wd 01 4runner with a 3; coil spacer lift , coil springs in rear.. if i bought this 2wd tundra coils and put them up front would it be the equivilant of the 3' spacer but just a coilover?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
smthwsn357
86-95 Trucks & 4Runners
15
May 1, 2024 07:28 AM
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
colasurdo
Prerunner & All 2WD Rigs
0
Jul 16, 2015 11:32 AM
Suprarossa
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
0
Jul 6, 2015 05:21 AM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
Jul 4, 2015 12:15 PM




All times are GMT -8. The time now is 02:18 PM.