Rebuilt Dana 44 w/ 3 Link & Panhard – Locked, Geared w/ Nitrogen Air Shocks!
10-11-2006, 08:41 PM
#1
Registered User
Thread Starter
Rebuilt Dana 44 w/ 3 Link & Panhard – Locked, Geared w/ Nitrogen Air Shocks!
I purchased a Toyota pick-up that had this axle under the front of it. The previous owner completely rebuilt this axle from tip to tip and it only has 10-20 miles on it and has never been off-road.
What’s included:
- Rebuilt Wagoner Passenger Side Drop Dana 44
- Brand New 16” Rock Equipment AirShox
- 1.75” x .375” Lower Links
- 1.5” x .25” Upper Links
- 1.5” x .25” Pan-hard
- 2” M.O.R.E Bushings on Frame-End of Links
- 5/8” x ¾” QA1 Rod-Ends on Axle-End of Links
- New Yukon 5.38 Ring and Pinion
- Lock-Right Locker
- Brand New Hubs, Rotors, Calipers, Brake Pads
- New Warn Locking Hubs
- 2” x .5” tierod
- Toyota to Dana 44 Extended Brake Lines
- Brand New Sky Manufacturing Flat Pitman Arm
- New Chevy 1-Ton Rod Ends
- The knuckles have been rotated on this axle also.
I’m asking $1500.00 for everything picked up. I’m happy to ship this on the buyer’s dime. If you’re thinking about Link SASing any kind of vehicle this is a steal of a deal. Because of my stubbornness about not wanting Heep stuff on my Toyota someone could SAVE LOT’S of TIME and MONEY.
PM me if interested, have any questions or would like more pictures.
What’s included:
- Rebuilt Wagoner Passenger Side Drop Dana 44
- Brand New 16” Rock Equipment AirShox
- 1.75” x .375” Lower Links
- 1.5” x .25” Upper Links
- 1.5” x .25” Pan-hard
- 2” M.O.R.E Bushings on Frame-End of Links
- 5/8” x ¾” QA1 Rod-Ends on Axle-End of Links
- New Yukon 5.38 Ring and Pinion
- Lock-Right Locker
- Brand New Hubs, Rotors, Calipers, Brake Pads
- New Warn Locking Hubs
- 2” x .5” tierod
- Toyota to Dana 44 Extended Brake Lines
- Brand New Sky Manufacturing Flat Pitman Arm
- New Chevy 1-Ton Rod Ends
- The knuckles have been rotated on this axle also.
I’m asking $1500.00 for everything picked up. I’m happy to ship this on the buyer’s dime. If you’re thinking about Link SASing any kind of vehicle this is a steal of a deal. Because of my stubbornness about not wanting Heep stuff on my Toyota someone could SAVE LOT’S of TIME and MONEY.
PM me if interested, have any questions or would like more pictures.
Last edited by yotaman; 11-06-2006 at 09:13 PM.
10-11-2006, 08:48 PM
#2
Registered User
Thread Starter
For any 4cyl Tacoma or 3rd Gen 4Runner guys looking to SAS there truck. I have a W56 and 2 good Gear T-Cases you can use to get a Passenger Side Drop and make it easy to put duals in. I also have an IFS steering box.
Last edited by yotaman; 10-11-2006 at 09:15 PM.
10-12-2006, 06:22 PM
#4
Registered User
Thread Starter
10-13-2006, 07:44 AM
#5
Registered User
Join Date: Jul 2005
Location: Calgary, AB, Can
Posts: 687
Likes: 0
Received 0 Likes
on
0 Posts
Umm...that's a passenger side pumpkin. It won't work on a 3rd Gen 4Runner (or any Tacoma)
It will however work on a 2nd Gen 4Runner or Pickup...I'd love to buy this sadly I don't have $1500 for an axle right now.
It will however work on a 2nd Gen 4Runner or Pickup...I'd love to buy this sadly I don't have $1500 for an axle right now.
10-13-2006, 06:21 PM
#6
Banned
Join Date: Aug 2005
Location: Chatt, TN
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Is this out of the Red 3rd gen pickup (boobed bed, 37" iroks, 1" lift) from pirate? Capable DD project truck?
If so I watched this build and its done right. I'm still throwing around some numbers on my next project and i'll hit you up as soon as I find out.
-Josh
If so I watched this build and its done right. I'm still throwing around some numbers on my next project and i'll hit you up as soon as I find out.
-Josh
10-13-2006, 08:10 PM
#7
Registered User
Join Date: Nov 2005
Location: Connersville Indiana
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
I just read that thread on pirate -- I would love to hear what became of the truck and why you (yotaman) removed the axle? Are you redesignin the front end, parting it out, what's up? That was one cool lookin' rig.
Bump for the axle ----
Bump for the axle ----
Trending Topics
10-14-2006, 01:14 PM
#8
Registered User
Thread Starter
A short list of my plans:
FZJ80 Axles Front and Rear
Triple 23 spline T-cases (shafts will be cryo’ed)
42” TSL’s
Cab Exo
Look for a build up in a few weeks.
10-14-2006, 04:19 PM
#9
Contributing Member
Join Date: Dec 2005
Location: vansterdam BC.
Posts: 1,427
Likes: 0
Received 0 Likes
on
0 Posts
bump for some big pimpin setup...id be all over that if i wasnt on the complete opposite side of the country...
10-15-2006, 07:13 PM
#10
Registered User
Join Date: Nov 2005
Location: Connersville Indiana
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
10-15-2006, 07:24 PM
#12
Registered User
Thread Starter
and say “I have triple cases and 5 sticks”.
10-16-2006, 04:45 PM
#13
Banned
Join Date: Aug 2005
Location: Chatt, TN
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
To those interested here is the build on the truck tis came out of. It shows the COMPLETE setup of the link system.... This chit was done right as far as I can tell and someone interested (with $$$) should shach it up. Too bad i'm broke 
http://www.pirate4x4.com/forum/showthread.php?t=375105
Bump for ya man.. you wouldnt happen to be looking for a BMW 325is DD
Would you?
-Josh
http://www.pirate4x4.com/forum/showthread.php?t=375105
Bump for ya man.. you wouldnt happen to be looking for a BMW 325is DD
Would you?-Josh
11-05-2006, 04:18 PM
#17
Registered User
Did you get my pm earlier about a yota axle? Send me some more info on this and let me know what it would take to get it out of your driveway. I found a cheap 87 4runner and am having a good time convincing my wife it needs to be in our driveway but I am trying.
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacNorWest]: 1992 4runner - 5VZ swap - Lifted
Swim
Vehicles - Trailers (Complete)
9
01-04-2016 10:47 AM
hiluxinargentina
86-95 Trucks & 4Runners
3
09-30-2015 05:51 PM
myotherrideisayoshi
86-95 Trucks & 4Runners
1
09-29-2015 05:41 AM
sonorn67
84-85 Trucks & 4Runners
3
09-19-2015 05:39 PM
