New Suspension Parts, 3rd Gen
Sep 10, 2007 | 06:48 AM
#1
Thread Starter
Registered User
Joined: May 2002
Posts: 167
Likes: 0
From: Atlanta, GA
New Suspension Parts, 3rd Gen
All Brand New in Box-
2 2" Toytec Front Spacers --- $100
2 OME 906 Rear Coils--- $ 150
Buyer Pays Shipping
I am in Charlotte, NC and I am willing to drive a short distance. I can also except Paypal as payment.
Any other questions, feel free to contact me on here via PM or reply to this...
Andrew
2 2" Toytec Front Spacers --- $100
2 OME 906 Rear Coils--- $ 150
Buyer Pays Shipping
I am in Charlotte, NC and I am willing to drive a short distance. I can also except Paypal as payment.
Any other questions, feel free to contact me on here via PM or reply to this...
Andrew
Last edited by hawkdog21; Sep 13, 2007 at 12:47 PM.
Sep 10, 2007 | 07:38 AM
#2
Registered User
Joined: Sep 2005
Posts: 5
Likes: 0
From: Atlanta
Rear Spacers
I'm looking for a set of rear spacers for a 2002 4Runner to try to level the sag. Also, do you have to lengthen the sway bar?? Know where i can get any of this?
Sep 13, 2007 | 12:47 PM
#3
Thread Starter
Registered User
Joined: May 2002
Posts: 167
Likes: 0
From: Atlanta, GA
bump for updated list of the items still left
Sep 13, 2007 | 02:13 PM
#4
Registered User
Joined: Jun 2007
Posts: 61
Likes: 0
From: Atlanta, Ga
i am interested in the spacers and coils and i'm located in atlanta. are you in charlotte or atlanta??
Sep 13, 2007 | 02:16 PM
#5
Registered User
Joined: Jun 2007
Posts: 61
Likes: 0
From: Atlanta, Ga
sorry im actually just interested in the spacers, i was unsure about how much lift the 906's would give
Sep 14, 2007 | 08:53 AM
#6
Thread Starter
Registered User
Joined: May 2002
Posts: 167
Likes: 0
From: Atlanta, GA
I have an 02, and I bought these items with a 2" lift in mind. The 906s will give around 2" of lift, and will not be stiff at all. I have the spacers and coils still, so just let me know what you want...
Sep 24, 2007 | 06:25 AM
#7
Thread Starter
Registered User
Joined: May 2002
Posts: 167
Likes: 0
From: Atlanta, GA
bumpy
Trending Topics
Oct 10, 2007 | 06:24 AM
#8
Thread Starter
Registered User
Joined: May 2002
Posts: 167
Likes: 0
From: Atlanta, GA
bttttt
Oct 10, 2007 | 07:08 AM
#9
Registered User
Joined: Jul 2003
Posts: 269
Likes: 0
From: Cincinnati, Oh
I'll take the coils. What's shipping to 45202 business address?
Do you take paypal?
Do you take paypal?
Oct 10, 2007 | 08:05 AM
#10
Registered User
Joined: Jun 2007
Posts: 61
Likes: 0
From: Atlanta, Ga
If you still have the coils and spacers then i am still interested in both. I had read about other people saying that the 906's didnt give any lift at all but i guess that is for 99's since their already an inch higher.
So becasue i have have an 02 4wd then it will give me two inches of lift?? Did you ever use this set up? So the car should sit pretty level with the spacers and 906's installed?
So becasue i have have an 02 4wd then it will give me two inches of lift?? Did you ever use this set up? So the car should sit pretty level with the spacers and 906's installed?
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
Steezy96yota
86-95 Trucks & 4Runners (Build-Up Section)
1
Jul 6, 2015 10:00 AM
FS[SouthEast]: 1st Gen 4Runner Slider Window, Driver Side
coryc85
Misc Stuff (Vehicle Related)
0
Jul 6, 2015 04:07 AM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
Jul 4, 2015 12:15 PM
