Will fit 3rd generation Runners and early Tacomas.
They have less than 6k miles on em after a complete rebuild by Sway-A-Way. Sold my truck so I really have no use for em anymore. Was hoping to get a 3rd generation Runner but changed plans so these are now up for sale to the first responder to this thread. Should the first responder back out they will go to the next person to respond and so on down the line till they are gone. Please do not e-mail or PM me as I only get to check the net on the weekends and it will be easier for me to look in 1 spot (this thread) for the people interested.

These are complete and ready to bolt in. Asking 400.00 plus shipping and they will come with a Martin spanner wrench for adjusting. They will ship from 74012 (Tulsa, OK) and depending on where you live....shipping should run anywhere from 25-35 dollars.

FWIW: Due to limited internet access, I'm not posting these on any other forum....only on YotaTech.

Here's some pics.....

 

just asking if these could fit a 99 taco

 

Couldn't help but notice you are shipping from tulsa oklahoma. Do you know of any Off Roading places or anything around here? Sorry to hijack.

 

Yes, they will bolt right in.

 

Locally, about the only places to wheel are Whitewater ORV located under the Keyston lake dam. Not much there though. Mostly sandy whoopty do dune type stuff, some loam and rocky hill climbs but nothing very difficult there. A good place to just play a bit. Behind Chandler Park on the west side. You can enter the woods off Avery drive below the park. From mild to wild out there. Not suggested to go out there alone.
The best place to wheel is about an 45-60 mins away. Disney, OK just below the damn. Thaty's where my avatar pic was taken during Howiepalooza 6. I got 3rd place in the stock class there. Again, everything from mild to wild and again, unless your just sticking to the rock garden and riverbed areas, not suggested to go alone. If you like trail riding, hill climbs and such, plenty of that as well but definatley take another rig with cuz you can get in some major crap in a hurry.

If you have any more ?'s on local spots, hollar in a PM and I'll be glad to help answer and more ?'s you might have. If you don't mind, leme know where in Tulsa you are in a PM. I live right by the new Bass Pro shop in BA.

Happy Wheelin'!

 

Nobody wants these???? My price to high or what?
The only other thread I could find with 2.0 SAW's for sale was selling them for 350.00 so I'll go ahead and lower my price to match.

If they do not sell on YT this week, I'll be posting them on other forums. 350 is my bottom dollar so if your interested....snag em up.

Thanks for the interest & Happy Wheelin'!

 

Hey man, This is just a thought. If you post these on Ebay or another board I'm sure you will sell them very quick. Personally, I would list them on ebay. Your SAW's in this shape would probably sell around $500 bucks! Let me know if you have any questions about ebay or anything, I'll be glad to help and good luck with the sell!

 

How do these ride on street, are they valved stiff for high speed runs or are they soft enough to enjoy a good street ride, I personally like a medium stiffness, I am just weary about getting a setup that is harsh on the road and bumps at slower speeds.

 

pm sent

 

how much lift for the front? are they already top out spaced?

 

nevermind from seeing the 2.0 they are 2 inches.. i wonder if I could get 3 inchs out of em with some spacers.. thinking about the offer

 

2.0 inches is the width, it will lift up to 2.5"

 

i will take em

 

They be on the way to ya.

Looking forward to hearing how you like em.

Thanks and Enjoy!

 

Still for sale? Im intrested let me know.

 

I'd say they are sold. however, I will have mine for sale soon, but they need to be rebuilt...