ARB winch bumper for a IFS Toyota 4Runner and Pickup 86 to 95. It was in a wreck and the winch was pushed back, so the winch mounting location is bent in. I'm sure it could heated up and beat back into shape or just cut that section out and replace it was some stronger steel. The mounting points on the bumper it's self are fine and will include all new bolts. Only selling cause I SAS'd my 4Runner and would like to go with a tube bumper instead cutting up the mounts to make it work with SAS.

jacksonville, fl

$350 OR BEST OFFER!

I'll post pics tomorrow evening.

nezsm76@yahoo.com

Steven

 

I'd be interested but it depends on how bad the carnage is to the winch point and if you're willing to ship to 92553...Plus how much shipping will be..

The carnage is only a minor concern, it will go nicely with the rest of my "dings"!

-=Morphine=-

 

E-mail sent.

 

I'll retract, thanks man.

 

Sale Pending at this time but he doesn't buy it I could ship Forward Air.

The winch mounting surface is bent in and isn't flat. I thought it'd be fine but I think it the reason my Warn M8000 burnt up the motor. I was going to cut out the center section of the bumper where the winch goes and replace it with 1/4" plate, this would give access to the winch. That's one thing I didn't like about the ARB bumper, if you needed to get to your winch you had very little room and if you needed to remove it you had to pull the bumper.

You can go to the link in my sig. and look at the "wrecked 4Runner" folder to see pic of the bumper right after the wreck. There are also pics of the bumper after I fixed the 4Runner. In the pics it looks like the bumper is bent upwards but the was only because I didn't have the side mounting bolts in, only had the front bolts along the bottom and front of the frame's cross member. I'll take some pics of the bumper mounting points.

 

pics???

 

I'll be taking them this evening but if you want to how it looked right after the wreck go the link in my Sig and look in the "wrecked 4Runner" folder.

 

Ok, so I checked out the pics from the link in your sig...carnage doesn't look to bad. I could work around the winch aspect of the ARB but a few of the pics make it look as if the bumber is "tweaked"? Let me know if you sell it or I'll be interested at taking a look at the new pics. Thanks!

-=Morphine=-

 

I can vouch for Steve- he's a good dude (considering he's a leatherneck...).

Steve gimme a hollar if you don't sell it & I didn't forget ya on the fender!
Jeff

 

Go to this link for pictures, look in the "Stuff For Sale" folder.

New link, this one works.
http://photos.yahoo.com/nezsm76

 

Thanks Jeff, I don't need that fender any more. I have a pair and a hood in Deland I need to go pickup.

 

what color is the bumper