I have everything butt the heads and block off a 1995 3.0 engine. I also have a complete 3.0 wiring harness and ECU. The truck had a 5 speed.

Let me know what you need and I'll get pictures. Make an offer on anything you need.

 

I'm interested in the distributor if its still OEM. Pls pm me a pic and how much you're willing sell it for w/ shipping to 92126.

 

how much for the volume airflow meter w/shipping to 74107

 

let me know if you still have the coil and ignitor?

 

Will the intake fit an 88 3.0? I am just looking for the complete set of intake tubes. Not the intake manifold.

 

Send me your email address and I'll get you picture.

 

Yes it'll fit. So do you want the plenum, intake box, the black tubes or something else.

 

Do you know where this is located? I can pull my service manual and look if you don't.

 

I don't know what the plenum is. I just want all the tubes from the throttle body to the intake box (I do not what either the throttle body or the intake box, just the tubes) including vacuum lines that are connected.

 

Working on fixing my truck. How much for EGR and TPS? I'm working on fixing a high start idle. Any suggestions would be great about what might be wrong. It's only at start. Once the truck warms up there is no high idle or idle up and down from engine. Thanks.

Zip is 24175

 

how much for the wiring harness and ecu? shipped to Va 23452

 

HOw muh for the power steering pump shipped?

 

how many miles were on it?
how much for the fuel injectors?

 

You have any pics of the timing belt Idler pulleys. I need the one that goes to the passenger side of the head.

 

What kind of condition is your flywheel? looking for one that is in good shape with no cracks. Ok if it needs machined. send me a PM with price and shipping to 45805. Thanks

 

So you aren't selling the short block? Damn it I need a block

Was it a Manual Transmission or an AT. If AT how much for the Throttle body?

 

How much for the wiring harness shipped to 49952

 

sorry to hyjack but ive got parts also... bumpin send me a pm on the short block

merace19, bad idea to get used idler pulleys for the timming belt. they are cheep and you dont want a used one going bad and toasting a new belt.

 

Be careful of Yotaman

I tried to buy some BJ spacers from him. We agreed on a price then he wanted to charge me $25 'handling charge'. His reason for this is in my signature. Then when I questioned him about it. He erased the thread so he wouldn't be embarrassed.

This is just MY experience with Yotaman I hope yours is better.

 

You are funny. You have to much time on your hands. I never took any of your money. I simply just did not sell you the item because we could not come up with a fair arraignment.

I erased the thread because I was tired of people like you trying to get something for nothing. I still have the stuff ☺☺☺☺ting in my garage and that's were it'll stay.