Gauge compatability
#1
Registered User
Thread Starter
Join Date: Jul 2007
Location: guam
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Gauge compatability
Anyone know if this gauge will work on the 3.4 swap? Just curious since most of our toys didnt come with mpg and other guages. It checks codes too. Thanks in advance on any info regarding this.
http://www.ultra-gauge.com/ultragauge/index.htm
http://www.ultra-gauge.com/ultragauge/index.htm
#3
Registered User
iTrader: (1)
The 2001-2004 Tacoma with 6 lug wheels and optional ABS is compatible with UltraGauge. However, when the ignition is first switched on, the interaction with UltraGauge may cause the ABS system to become disabled and the ABS dash indicator will become lit. For this reason, UltraGauge is not recommended for the Tacoma with optional ABS.
This issue was corrected by Toyota in 2005 and later years.
This issue was corrected by Toyota in 2005 and later years.
#4
Registered User
I'll be getting one for my 87 4Runner.
#6
Registered User
Vital22re has one for his swap, I have been eyeing this one for quite a while. Works well. Good thing he knows how to do the wiring harness. I'll get to keep A/C, cruise, and add the obdII port.
I am down to a couple small parts left. Need the 3.0 frame mounts. (hard to find for a 22re to 5vz swap) Nobody wants to hack them off or let me come hack em off the frame. I still need an ignitor (Deathcougar has one for me) Then I need crossover reworked and harness made and its swap time. Getting close, but I have other projects in front of it. It might be a month or 2 before I can get to it. I am going to start working weekends and that's when everyone else can meet up.
I am down to a couple small parts left. Need the 3.0 frame mounts. (hard to find for a 22re to 5vz swap) Nobody wants to hack them off or let me come hack em off the frame. I still need an ignitor (Deathcougar has one for me) Then I need crossover reworked and harness made and its swap time. Getting close, but I have other projects in front of it. It might be a month or 2 before I can get to it. I am going to start working weekends and that's when everyone else can meet up.
Trending Topics
#8
Registered User
#9
Registered User
Thread Starter
Join Date: Jul 2007
Location: guam
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
#10
Registered User
Seen one in action. It's sweet. But PM vital22re for his opinion. he uses it daily.
#11
Registered User
I have two of these in a gauge pillar in my '88 3.4 supercharged swap.
http://www.plxdevices.com/multigauges.html
I am able to have 8 real-time parameters from the OBDII stream as well as boost and wideband AFM all diplayed all of the time. It also allows for code reading/resetting and looking at most available OBDII pims's.
What is nice is that you only really need one gauge and all of the sensor modules can piggyback to it.
http://www.plxdevices.com/multigauges.html
I am able to have 8 real-time parameters from the OBDII stream as well as boost and wideband AFM all diplayed all of the time. It also allows for code reading/resetting and looking at most available OBDII pims's.
What is nice is that you only really need one gauge and all of the sensor modules can piggyback to it.
Thread
Thread Starter
Forum
Replies
Last Post
ashamsuddin
General Vehicle Related Topics (Non Year Related)
17
01-13-2023 03:17 AM
kawazx636
The Classifieds GraveYard
34
10-06-2021 03:03 PM