View Poll Results: Would you buy 3.4 swap headers is made available
Voters: 29. You may not vote on this poll
3.4 5vzfe swap headers
02-03-2013, 04:13 PM
#81
still having issues with bends .. and absolutly wont sell with the results were getting !!
we're now going to a .090 wall thickness , but having difficulties getting product in our area ..
still working on it .. 2 steps forward , 1 step back
.
we're now going to a .090 wall thickness , but having difficulties getting product in our area ..
still working on it .. 2 steps forward , 1 step back
.
02-08-2013, 05:35 PM
#86
Registered User
Join Date: Feb 2012
Location: Florence, OR
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
When i did my swap last year, i took the stock manifolds from my donor motor, (2001 tundra) and cut them off at the flange plates, kept those and tossed everything else. Took them down to my buddy at the local muffler shop, along with the motor on a stand. told him i wanted 1 1/2" primaries, 3-2-1 dumped into a crossover that goes to the drivers side, no flex joint, with 2 1/2" pipe out, came back 2 weeks later, picked up the motor and took it back to my shop, fit perfectly the first time. header wrap on the crossover pipe, high temp paint, 2.5" exhaust the rest of the way thru. $750 
i should have taken pictures before they went in, i could still get some if you wanna see. went into a 94 extracab, S/C, urd fuel mods, etc. my swap cost me about $10k, but she moves!!!
i should have taken pictures before they went in, i could still get some if you wanna see. went into a 94 extracab, S/C, urd fuel mods, etc. my swap cost me about $10k, but she moves!!!
02-21-2013, 04:24 PM
#89
so the supplier in Kelowna was a big fail .. they couldnt get it after they told me they had it .
but I did find another , they actually have it in stock (paid and set aside for pick up ) , and I am driving on Saturday to get it ...
.
but I did find another , they actually have it in stock (paid and set aside for pick up ) , and I am driving on Saturday to get it ...
.
03-10-2013, 06:25 PM
#98
