Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

EGR info needed.

Thread Tools
 
Search this Thread
 
Old Oct 22, 2005 | 02:05 PM
  #1  
NathanBERG's Avatar
Thread Starter
Banned
 
Joined: Jul 2004
Posts: 373
Likes: 0
From: Washington State
Question EGR info needed.

Okay I have a 1990 4runner v6. I am wondering if there should be a wire for the EGR temp conected to the EGR? I bought it used and it did not have one on there. I see the little hole on the side of the EGR valve but there is no wire hooked up. I have also discoverd a wire that looks to be unhooked and in the location of the EGR valve. Here is a photo of the EGR and wire.

Am I missing the Temp sensor? And if I am could this be why I am getting a code 71?

It is a Fed/Canada vehicle.
Witch leads me to another question. Why if it is a FED and CAN Vehicle would I be getting the code 71, witch is only for California Vehicles according to my Manual?

Dose anybody have a FED/CAN emissions Yota that has the temp Sensor wire?

Last edited by NathanBERG; Oct 22, 2005 at 05:53 PM.
Reply
Old Oct 22, 2005 | 06:46 PM
  #2  
DH6twinotter's Avatar
Contributing Member
 
Joined: Oct 2002
Posts: 1,661
Likes: 0
From: Charlotte, North Carolina
I don't have anything in that hole on my '90 v6 either. I have a loose grey connector just laying around too. Either we both have problems, or there isn't any problem with that.
Reply
Old Oct 22, 2005 | 07:03 PM
  #3  
NathanBERG's Avatar
Thread Starter
Banned
 
Joined: Jul 2004
Posts: 373
Likes: 0
From: Washington State
ummm? Okay cool thx for your reply!! Have you ever got that darn code 71?
Reply
Old Oct 22, 2005 | 07:05 PM
  #4  
DH6twinotter's Avatar
Contributing Member
 
Joined: Oct 2002
Posts: 1,661
Likes: 0
From: Charlotte, North Carolina
Sure, no problem. I don't have a code 71 though.
Reply
Old Oct 23, 2005 | 10:27 AM
  #5  
eric-the-red's Avatar
Contributing Member
 
Joined: Oct 2003
Posts: 2,593
Likes: 7
From: Port Coquitlam, BC
My Canadian 93 4Runner 3.0 V6 had a EGR temp sensor, but it was never connected to anything. It had about 3-4 inches of wire with a connector that wouldn't match anything else. And I also had that grey connector that you circled but it did not match the temp sensor connector.

The temp sensor threads into the hole, looking at your pic I can't tell if the hole is threaded or not. If it isn't then i don't think there is supposed to be a sensor in there.
Reply
Old Oct 23, 2005 | 10:35 AM
  #6  
fillsrunner4's Avatar
Registered User
 
Joined: Jun 2004
Posts: 2,906
Likes: 2
From: Woodinville, wa
I once removed this sensor from that spot. I drove around for awhile and eventualy my check engine light came on. I never checked for a code, I just plugged it back in and the light went out and never came on again. If you need this sensor I have one since im swapping out my motor for a 3.4. Let me know.
Phil
Reply
Old Oct 23, 2005 | 11:14 AM
  #7  
ChickenLover's Avatar
Registered User
 
Joined: Apr 2004
Posts: 2,583
Likes: 1
From: NV
Hey Nathan,
My rig aint canadian, but it certainly does have the sensor connected to your mystery wire.


Last edited by ChickenLover; Oct 23, 2005 at 11:16 AM.
Reply
Old Oct 23, 2005 | 12:59 PM
  #8  
DH6twinotter's Avatar
Contributing Member
 
Joined: Oct 2002
Posts: 1,661
Likes: 0
From: Charlotte, North Carolina
I wonder why some have this and some don't? Seems odd. What does the temp sesnor do anyways (other than read temp.)? Would this cause pinging? I'm going to check the local Toyota dealership and have them check my VIN to see if I need one.

Thanks for bringing this up! I had wondered about that hole a few time too.

Have fun all.
Daniel
Reply
Old Oct 24, 2005 | 01:55 AM
  #9  
NathanBERG's Avatar
Thread Starter
Banned
 
Joined: Jul 2004
Posts: 373
Likes: 0
From: Washington State
Originally Posted by fillsrunner4
I once removed this sensor from that spot. I drove around for awhile and eventualy my check engine light came on. I never checked for a code, I just plugged it back in and the light went out and never came on again. If you need this sensor I have one since im swapping out my motor for a 3.4. Let me know.
Phil
How much do you want for the Sensor? I want it !

Last edited by NathanBERG; Oct 24, 2005 at 02:32 AM.
Reply
Old Oct 24, 2005 | 02:01 AM
  #10  
NathanBERG's Avatar
Thread Starter
Banned
 
Joined: Jul 2004
Posts: 373
Likes: 0
From: Washington State
Originally Posted by eric-the-red
My Canadian 93 4Runner 3.0 V6 had a EGR temp sensor, but it was never connected to anything. It had about 3-4 inches of wire with a connector that wouldn't match anything else. And I also had that grey connector that you circled but it did not match the temp sensor connector.

The temp sensor threads into the hole, looking at your pic I can't tell if the hole is threaded or not. If it isn't then i don't think there is supposed to be a sensor in there.
YEP it's Threaded.
Reply
Old Aug 24, 2011 | 04:48 AM
  #11  
bduane's Avatar
Registered User
 
Joined: Mar 2010
Posts: 5
Likes: 0
From: LittleFalls,Mn.
where is the EGR on a 1989 22RE?can someone help with a pic?at low rpm's
in gear the throttle will kick out & back in when steady rpm but not while giving gas.this happens in every gear.(5 spd)
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
splangeland
86-95 Trucks & 4Runners
14
Apr 6, 2024 08:14 PM
ToyotaMD
Engines - Transmissions
0
Sep 22, 2015 06:28 AM
runnermedic
95.5-2004 Tacomas & 96-2002 4Runners
13
Sep 21, 2015 05:20 PM
accuracy
86-95 Trucks & 4Runners
9
Sep 20, 2015 07:44 PM
Boomer8404
86-95 Trucks & 4Runners
3
Sep 10, 2015 09:01 AM




All times are GMT -8. The time now is 07:53 AM.