4.0 VVTI swap to replace 3.SLOW
#1
4.0 VVTI swap to replace 3.SLOW
I really love my 95 4Runner but at almost 200K I know its only a matter of time. I thought about doing the 4.3 chevy swap and even a 350 but after thinking about it I would like to put one of the newer 4.0 Toyota motors in as a replacement. Now for the big questions --- will my 5 spd bolt up to the 4.0 ?? or is this swap impossible ? I really don't know and I haven't seen anyone talk of it or attempt it. I DO NOT want a 3.4 so don't even bring it up not gonna go there. I am looking for something much more current. I have come across a few salvage powerplants at a reasonable price so --- If you know tell me the good and the bad about this idea!
#2
Joined: Jan 2003
Posts: 17,692
Likes: 58
From: Marysville, WA
First hurdle you need to overcome is the oil pan. Unless you know how to fabricate aluminum and steel oil pans, you might want to just let it go. And whats wrong with the 3.4 swap? Lots of power, boost potential, aftermarket support, reliable, and it fits without any welding required. Am I missing something?
#3
Ok so suppose I do need to fab a new pan. That seems like small taters. Will it fit is the biggie?? what about the tranny?will I need to find one to go with the new motor? What would be the best choice with my 4 runner?
#4
i believe you need the matching tranny and an adapter to use your transfer case or one from a 22re because the transfer from the 4.0 dumps the driveline for the front diff on teh driver side. Then you gotta think about exhuast routing and all the wiring involved. and your fuel delivery. I have heard of a guy throwing one in his 97 taco but he ended up goin with a bigger motor. good luck with your research.
#7
heres one .. good luck if you decide to do it..
https://www.yotatech.com/forums/f2/s...3-0l-v6-53160/
https://www.yotatech.com/forums/f2/s...3-0l-v6-53160/
Trending Topics
#8
heres one .. good luck if you decide to do it..
https://www.yotatech.com/forums/f2/s...3-0l-v6-53160/
https://www.yotatech.com/forums/f2/s...3-0l-v6-53160/

That is the one to read.
Fink
#9
First hurdle you need to overcome is the oil pan. Unless you know how to fabricate aluminum and steel oil pans, you might want to just let it go. And whats wrong with the 3.4 swap? Lots of power, boost potential, aftermarket support, reliable, and it fits without any welding required. Am I missing something?

Now some men, you just can't reach...
#12
I would like to have one too but If it's gonna take re-inventing nuclear power -- fugettaboutit. I was thinking it might not be too bad-- guess i thunk wrong - huh. If i want a 4.0 too bad I'll just go buy a new FJC.
HMMM now the SBC don't sound so bad after all.
HMMM now the SBC don't sound so bad after all.
#14
Well the reason for inquiring in the first place is I would like to be able to tow my dog trailer with my runner. the 3.Slow just aint got enough guts. So i need something with some low down grunt.
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthEast]: Mercury Villager Fan & DCC Fan Controller
coryc85
Misc Stuff (Vehicle Related)
6
Sep 9, 2015 06:24 AM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 6, 2015 01:20 PM






