4Runner parts
#1
Thread Starter
Registered User
iTrader: (1)
Joined: Feb 2011
Posts: 1,869
Likes: 3
From: The Dirty South
4Runner parts
Most of you know I travel for work. I have a friend that informed me that I could have the tailgate, top and wheels to a parts a Runner he had from a couple years ago. All in alleged good condition.
But it's a 2-3 hr trip for me to go get it. My question is: Is it worth it, just to have it?
But it's a 2-3 hr trip for me to go get it. My question is: Is it worth it, just to have it?
#2
I have seen 4Runner tops go for sale for $50-200. I had one given to me once.
Tailgate could be worth a bit if the motor and glass are in good shape..
personally I would probably ask for some pics.. 2-3 hour drive round trip = 6 hours..$50-75 in gas???
Tailgate could be worth a bit if the motor and glass are in good shape..
personally I would probably ask for some pics.. 2-3 hour drive round trip = 6 hours..$50-75 in gas???
#3
Thread Starter
Registered User
iTrader: (1)
Joined: Feb 2011
Posts: 1,869
Likes: 3
From: The Dirty South
Yeah that's kind of what I was thinking. Is it worth the gas...? He says he has a few other odds and ends that I am welcome to also. No idea what those could be...
On a side note, are these tops durable? Meaning, if I brought it home one the back of my pickup, via lumber laid across the bed and top strapped down, is the top tough enough to handle that type of transport? Or do the tops need full support under the sides, such as where it bolts to the body?
On a side note, are these tops durable? Meaning, if I brought it home one the back of my pickup, via lumber laid across the bed and top strapped down, is the top tough enough to handle that type of transport? Or do the tops need full support under the sides, such as where it bolts to the body?
#4
I would do the trip just for the tailgate. Those are hard to find in my area. As far as the top, I would suggest using C-Clamps to clamp it to the bed of your truck. Never put on a truck bed so not sure if it would work.
#5
Thread Starter
Registered User
iTrader: (1)
Joined: Feb 2011
Posts: 1,869
Likes: 3
From: The Dirty South
Thanks for the help guys. I guess I will go check it out as soon as I can. If it's rust free, I will grab the tailgate. If the top isn't hammered, I will grab it too. Maybe some of my Yotatech brothers/sisters will need something I get from this non-Yota guy...
Last edited by rokblok; Oct 27, 2013 at 10:09 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
Jul 4, 2015 12:15 PM
crazypaint
Buying & Selling Advice - Feeler/Gauging Interest
3
Jun 23, 2015 03:27 AM



