Bypassing window lock button
May 9, 2016 | 09:15 PM
#21
Here is how I bypass the safety switch.
Running a ground wire from this wire on the plug, the blue wire to the place on the pic below elminates a lot of problems.
Ground to center consloe mounting tab.
The ground wire bypasses the following safety switches. Cover Top and Door Lock Detections switch. Your window will roll up with top off. This is on Page 12-23 of the Haynes Manual where the key is to the botom of the page.
Haynes "L" for Blue, "R" for Red. Key is pointing to wire.
Running a ground wire from this wire on the plug, the blue wire to the place on the pic below elminates a lot of problems.
Ground to center consloe mounting tab.
The ground wire bypasses the following safety switches. Cover Top and Door Lock Detections switch. Your window will roll up with top off. This is on Page 12-23 of the Haynes Manual where the key is to the botom of the page.
Haynes "L" for Blue, "R" for Red. Key is pointing to wire.
Thread
Thread Starter
Forum
Replies
Last Post
britishdudes2dr
86-95 Trucks & 4Runners
0
Jul 25, 2015 06:47 AM
icentropy
86-95 Trucks & 4Runners
7
Jul 14, 2015 10:23 AM
