Hey guys! I'm new here and love yotas! Well anyways as the title states if you guys need any wiring diagrams for your truck no matter the make, model, or year I have em. I used to be an installer for mobile electronics, stereos, alarms, etc. I have wiring diagrams for your DIY guys that are installing alarms, stereos, speakers whatever you need! Just PM me or Ill post the diagram on this thread for everyone to view.

 

I believe its a stock alarm but im not sure, it has a sensitivity level adjuster and wires spliced everywhere. after I rebuilt the heads and new waterpump, timing belt ect. put everything back together and I get nothing when I turn the key. starter is good, battery good. so I started tearing down the wires under the dash and eventually got it to atleast turn over and crank but I think it still is holding the fuel pump back. can you please send me the alarm wiring diagram for a 95 4runner 3.0l please =)

 

hey im pretty new here to and i was cruisin around tryin to find some wiring diagrams for my 91 3.0 auto 4runner because i am attempting to do my own 3.4 swap i got the motor out of a 97 auto 4runner if you could help that would be so solid

 

Hey! I'm wanting to do an alarm & remote start install for my 95 land cruiser. If you could help me get the wiring diagram, I would be eternally grateful. Thanks!

 

hi b874runner my taco is a 2009 pre-taco with alarm sys prob any diagrams on stock

systems would greatly appreciated. i have checked door switches seem ok might have

lost ground on main box still checking but where .

thanks in advance jeff

 

Do you by any chance have a wiring diagram for the above vehicle?

 

I've got a '97 SR5, with a ort installed VIP S-1000 alarm that no longer works. I can't find any information on it. I'd hate to have to start tracing down wires. I don't know where it's fused. Do you have anything?

 

By any chance would you have a wire diagram for a 1990 yoter 4runner with the 3.0 v6. I have a factory alarm and i need to locate the alarm brain box so i can reset it to program a new key fob

​
Thank you in advance