Any interest for 1st Gen 4Runner pull handles?
12-04-2018, 05:58 AM
#1
Registered User
Thread Starter
Join Date: Jan 2016
Location: Southwest VA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Any interest for 1st Gen 4Runner pull handles?
Wanted to see if this was a major problem in the 1st gens, the rear seat pull handles to fold the backs down have broken on both of my seats. I got in contact with a 3D printing company that would be willing to make some of there was somewhat of an interest in the community. Anybody interested in 3D printed pull handles?
12-04-2018, 06:25 AM
#2
Registered User
From what I've seen there are different release mechanisms in the first gens. (mine are metal) You should post a photo of the kind you are referring to.
12-04-2018, 11:49 AM
#3
Registered User
Thread Starter
Join Date: Jan 2016
Location: Southwest VA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
I can’t get a great picture since I don’t have any of my own to picture. Here’s the best I can find. Plastic knob like handles to fold the seat backs down.
12-05-2018, 03:36 AM
#5
Registered User
My 4runner has the type you posted a picture of as far as I can tell. Both of mine are still intact, but I'm sure there must be a lot of people out there with missing or broken ones. Have you gotten a price per knob?
12-05-2018, 09:25 AM
#6
Registered User
Thread Starter
Join Date: Jan 2016
Location: Southwest VA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
He didn’t give me a price, he wanted to gauge the interest at first. I’ll ask him.
Trending Topics
12-06-2018, 04:21 AM
#8
Knobs should be pretty standard. Go to junkyard and try some. Plastic housing of my backrest broke so I got a set from 3rd gen. I think it will work but Ive been too busy to install.
Thread
Thread Starter
Forum
Replies
Last Post
MattNuge
95.5-2004 Tacomas & 96-2002 4Runners
7
01-05-2008 08:46 AM
