4Runner hood scoops
06-07-2010, 01:47 PM
#21
Registered User
Thread Starter
Join Date: Jan 2010
Location: Atlanta GA
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
07-04-2010, 05:09 PM
#22
Registered User
Join Date: Jan 2005
Location: Vancouver, British Columbia
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
Here's My Sport hood on my 97
And Designing an induction system to channel the air into the airbox>
And Designing an induction system to channel the air into the airbox>
Last edited by 97Limited; 07-04-2010 at 05:10 PM.
07-04-2010, 06:22 PM
#23
Registered User
Join Date: Oct 2009
Location: Pgh, PA
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
With a welder, anything is possible. I have a 95+ scoop welded in and opened up (none of the trim and cosmetic pieces and open behind the hole underneath) on the hood on my Pathfinder. If I get ahold of another wrecked scoop hood to cut up, the 4runner will have one as well.
07-05-2010, 05:50 AM
#24
Registered User
Thread Starter
Join Date: Jan 2010
Location: Atlanta GA
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
07-05-2010, 05:57 AM
#25
Registered User
Join Date: Feb 2008
Location: the great Maine wilderness
Posts: 2,049
Likes: 0
Received 4 Likes
on
4 Posts
heres my 93 with some scoops from lund....
They original plan was to cut the hood, and make these functional....7 years later, and I still just havent got around to it yet
They original plan was to cut the hood, and make these functional....7 years later, and I still just havent got around to it yet
05-03-2012, 07:22 AM
#27
Registered User
Thread
Thread Starter
Forum
Replies
Last Post
jasonty
Pre 84 Trucks (Build-Up Section)
41
12-23-2018 01:00 PM
BeMiceElf
Misc Stuff (Vehicle Related)
7
10-10-2015 09:40 PM
