22re swap to 22r
#21
Registered User
I'm doing the same thing! I'm almost done, just down to finishing the vacuum lines and electrical stuff. Does anyone happen to know if gas will flow through the electric fuel pump if I pull the fuse and let the manual do all the pumping?
#22
Registered User
dlgrafton, you will need to pull the electric pump it will cause you problems.you can find the 22r tank parts at the salvage yard.
Last edited by swampfox; 09-05-2010 at 03:08 PM.
#23
Registered User
Thread Starter
hey dlgrafton, how did it go? was it easy, or hard, or medium? lol.
im just curious...but do you have any tips or pointers your willing to share?
and how was it to change over the electrical and vacuum lines?
im just curious...but do you have any tips or pointers your willing to share?
and how was it to change over the electrical and vacuum lines?
#24
Registered User
Pointers...only one person should be taking bolts out or both should be watching. I have had to be creative when guessing what boths are supposed to go where. Still am working on the wiring...I'm gonna have a lot of taped up empty plugs and still have to figure out how to use what I can like finding the plugs for the oil pressure switch and sending unit. Have to find something to do with the wires coming from the carb that don't have anything to plug in to. Since the body is EFI, I am missing some aspects of the vacuum system, but I think I have creatively combined the two...somewhat. Will know by Tuesday if the thing is gonna run...wish me luck...
Thread
Thread Starter
Forum
Replies
Last Post