32x11.5x15 Cooper Discover STT's. Great tread wear(so far), minimal road noise, and excellent traction on and offroad!

 

31 x 12.5 Pro-Comp AT on 8" MT wheels.I have the RB 1" body lift and torsion and rear shackle.I can easily fit some 32 x 11.5 tires.

 

285/75/16 geolanders on stock 16x7 rim on 99 4runner sr5... some lift, no trimming, no grinding, great fit!! and very nice on road qualities, along with decent offroad, its a street tread, but much better than the bald stocks off road

 

Super Swamper LTB 33x13.50-15LT on 15x10 Aluminum Rims 3inch body lift, no trimmig, fender flares, no flaps

 

33X9.5s on 4runner 15X7 alum rims
94 PU with no lift, no trimming, no spacers, no nothing

Here's what she looks like:

 

i got 32x12.50 BFG Muds on mine.

 

265/70/16 for street on trd wheels and 265/75 16 mud kings on stock steel tundra wheels.

 

33-12.50 on blacked out stock 15's..... RB bj spacers, air lift and 2 inch coil spacers in the rear

 

36 x 12.5 humvee tires

 

Mine has 31x10.5's, but I'd like to have something 33" or bigger without lifting the truck. Does anyone know where I could find out how to cut my fenders or mabe find some replacement high-clearance fenders (BushWhackers for this model are lame)? My '94 4x4 reg cab has just enough room for those 31's to fit inside the fender well on the rear when she's torqued and anything knobby may scrape. Does anyone know how to keep this truck low/stock height, but still get some testosterone laced meats around her? And should I get some locking diffs or gears in it? I've had the truck 3 months and have done a $350 front brake job, $850 clutch, flywheel, rear mainseal, and pinion seal replacement, and the 15x8 steelies w/31x10.5's. My next move should be the u-joint replacement in the rear and a snorkel, because the darn air intake is too low and directly in the front, at the headlight. I'd also like to know if anyone knows where I can get a huge rollbar for the bed. Thanks!

 

I love this topic Best site I've found for it here

 

33x12.50x15. More tire to spin, but more mud to throw!

 

I am running some bald 33x12.5x15's I'll be moving up to 35's to match my 5.29 gearing Don't mind the missing light and 31" spares, I haven't had enough time to get around to those yet

 

31x10x5

 

Stock Hillbilly Meats.

 

Why does it look like your in San Antonio. That looks like an area around the north tip of devils den, way north near Eckert and Bandera.

 

Well, I do live in San Antonio, and I do play in the den alot, but those pictures were actually from the bus barn (off wetmore, by the niesd police substation and the home depot warehouse). If you're not scared of the possiblilty of suckin water, it's rreeaaalllly deep right now from those couple of days of rain we got. I went down there last night and it still comes up to the bottom of my doors in the SHALLOW parts haha.

 

How are you guys running 35s on stock rims? I just bought my runner, and the briliant previous owner Put 36s on it with what I think are stock rims. Rubs like crazy. Im going to put 35s with about 3.75 -4.00 of backspaceing.

 

Bottom on the doors eh? Thats around the dept I would drive on down Leon Creek after a raid. Oh I remember getting water up to the bottom on my headlight and freaking out. Just kept driving forwards to push water out of the way with my bumper. I wish I still lived in SA, I am up in DFW area and there isnt a place like the den up here, atleast not where cops dont camp.

 

just got some 32 x 11.5 BFG A/Ts