Any one know where I can get the little clip that holds the wiring plug to the TPS this is for a 86 4Runner

 

I made one out of a small/thin paperclip once - otherwise your best bet would be to just snag one out of a junkyard

 

x2 junkyard or go for homemade

 

you can try the paperclip, or maybe some 26ga wire from a craft store or home improvement store wrapped around and twisted together, or strip the paper or plastic off of a trash bag tie... or ...

 

you forgot bubble gum and zip-ties!

 

Bailing wire or duck tape!!!!!

 

I forgot jb weld and super glue too.

 

How 'bout that Billy Hayes magic putty stuff.....

 

might be able to bungee cord the plug/harness to the radiator support...

 

hot glue always works.....

 

wedge a 2x4 between the tps and cold start injector

 

bungee cord would match my battery hold down!

gotta keep it "bling" under the hood

 

Hire bridget the midget to hold it 2gether for you.....

 

remove the TPS from the throttle body and actuate it through a rube-goldberg like mechanism connected to the board game "Life" spinner, 4 squirrels, 2 lesbians, an MRI machine, the video game "pong", 1 cat (chasing the 4 squirrels), 3 dogs (chasing the cat), the "Death Star" Lego kit, SwampThings medical history, 1 parakeet and 193 steel pachinko balls.

 

Abe, you 4got the partridge in the pear tree....again

 

would that be Danny or Keith Partridge... in the pear tree?

 

a simple question by the OP to this

 

you forgot the "Partridge" in a pear tree.

oh, wait... "I" forgot... nevermind.