Stereo shot?
#1
Stereo shot?
So went wheeling in my back yard (own 18 acres ) for 3 hours with a buddy and did it for twntey minutes yesterday by myself. Two issues My fuse. Melted going to the positive post from my battery was a mess from original owner and did a quick job to get my pickup running again because that ran everything so I guess starter too no electrical was working then so out a positive wire from extra stereo wire laying around my buds house. Works fine. Trying to find what part I need to get from a toyota dealer 2. Went wheeling yesterday hit a rut. Stereo just stopped working and amp too SHORTED? I have no idea how to rip apart my dash to get to stereo (first truck and I'm 18) Any help on either of these issues would be greatly appreciated. Sorry if I posted this in wrong section
#2
So went wheeling in my back yard (own 18 acres ) for 3 hours with a buddy and did it for twntey minutes yesterday by myself. Two issues My fuse. Melted going to the positive post from my battery was a mess from original owner and did a quick job to get my pickup running again because that ran everything so I guess starter too no electrical was working then so out a positive wire from extra stereo wire laying around my buds house. Works fine. Trying to find what part I need to get from a toyota dealer 2. Went wheeling yesterday hit a rut. Stereo just stopped working and amp too SHORTED? I have no idea how to rip apart my dash to get to stereo (first truck and I'm 18) Any help on either of these issues would be greatly appreciated. Sorry if I posted this in wrong section
slowerAll I gathered for sure was you need a manual, but I don't know what year or vehicle you didn't say..
If you intend to be offroading you need to go over the whole vehicle top and bottom front and back... But definately the electrical system at the very least, done right with solder and heat shrink, no twisting and taping!
I'm afraid to ask but.. You blew the 80amp main fuse? And ran a wire direct from the battery to where?
It's rock crawling not baja
Slow down
Last edited by Co_94_PU; Jan 26, 2013 at 05:18 PM.
#5
Did you put the whole can of chew in your mouth at once?
Since you ignored this whole post, you might want to read it again.
Since you ignored this whole post, you might want to read it again.
Take a deep breath and run that by us again slower
All I gathered for sure was you need a manual, but I don't know what year or vehicle you didn't say..
If you intend to be offroading you need to go over the whole vehicle top and bottom front and back... But definately the electrical system at the very least, done right with solder and heat shrink, no twisting and taping!
I'm afraid to ask but.. You blew the 80amp main fuse? And ran a wire direct from the battery to where?
It's rock crawling not baja Slow down
All I gathered for sure was you need a manual, but I don't know what year or vehicle you didn't say..
If you intend to be offroading you need to go over the whole vehicle top and bottom front and back... But definately the electrical system at the very least, done right with solder and heat shrink, no twisting and taping!
I'm afraid to ask but.. You blew the 80amp main fuse? And ran a wire direct from the battery to where?
It's rock crawling not baja Slow down
#6
FSM instrument panel section
Start at the bottom and work your way up. I think that lower center section has a hidden screw behind the glove box.
(And now I see why everyone hates pulling thier dash, It's much easier w/o a glove box)
Start at the bottom and work your way up. I think that lower center section has a hidden screw behind the glove box.
(And now I see why everyone hates pulling thier dash, It's much easier w/o a glove box)
#7
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
spiewaker
86-95 Trucks & 4Runners
11
Dec 16, 2015 01:10 PM



