Bluduck

Hit a surprise RR crossing about 30mph faster than I should have. Stalled out and sputters when I turn it over, but won't run more than a second or so. I checked all the wires and plugs I can get to on a hot engine roadside. Anyone have any ideas?

Terrys87

iTrader: (1)

Did you knock the cable loose from your air box? Any loose hoses that could cause a vacuum leak?

Bluduck

The airbox looks all good, can't find anything loose, unplugged.

RAD4Runner

Like Terry says. Getting combustion while cranking but shutting down when IGN key is released usually has something to do with the circuit opening relay and the AFM flap. Here's how it works:
https://www.yotatech.com/forums/f116.../#post52387681

When engine cools down. Inspect all connections again. Pls see signature.

Bluduck

Got a tow on the way, this should be useful once I get it home. Thanks!

wyoming9

iTrader: (1)

I wonder if the landing caused the Circuit opening relay to be damaged after all it is getting up there in age .

Then it could be almost anything fuel related .

RAD4Runner

I'm betting on loose wiring/connections.

Discombobulated

Sooooo what speed should you have hit it at?

thefishguy77

iTrader: (1)

First real post of the thread.

jakey poo

I'm hoping 60mph, and he took it Dukes of Hazzard style

Bluduck

Got down to around 45 when I hit the tracks, but I did catch some respectable air. 😂

Discombobulated

Nate Allan

I assume this is a FE motor? Check your tab or spade style terminal connections at the injections this has more common than not been an ongoing issue.

Bluduck

Need more specifics. I put a new COV in and it still just turns over, without starting. Yes, all 4in the air.