thanks man^ Good idead because this thread has some GREAT info..o and neat pictures haha

Where can you get those cone washers? I guess the dealer

 

Wab Fab and Trailgear have kits with cone, stud, washer and nut for $4. Marlin has the pieces seperate but the cone washer is $3.29 alone so...
Or the dealer.

 

The dealer has them listed as a "split dowel" and will cost you a FORTUNE for just the cone washers.

 

I heard they are over 2 bucks a pop, and you need 12....

 

so the stuff from wabfab is $4 a set and i need 12 sets?

 

bump for answers

 

Kind of. If you don't have the cone washers, I'm guessing you don't have the nuts and lock washers either? You probably DO have the studs... but if you're going to get the other stuff, you might as well get the kit. I know Marlin sells the parts seperately but the cone washer is the deal breaker. $3.29 (I think) at Marlin. So for an extra 71 cents each (or $8.52) you get everything new. Your call.

 

i know this is an old thread but Shannon at Champion Toyota in Houston gives discounts to YT members. He sold me all 12 studs and both o-rings for $13.xx. .64 cents a stud and2.62 for an oring. Yt price on cone washers are 2.xx but like 6.xx list. call him up for parts
by the way, wheres the pics of them installed??

 

You need to search 4x4wire for a write-up.

 

Where did you find one of those springs?

 

IIRC the other one was still connected to the bigger spring on his other hub. He just looked over it.

 

Wow. Flashback. I remember us sitting up half the night on this thread.

 

Oh, yeah my problem is one of them is stretched out:

 

IIRC those are universal on all Aisins.

 

Yeah, I wouldn't doubt that. Got any spares Wabbit?

 

Sure, I got some spare of those laying around somewhere. Think they came off a Mitz or a Isuzu or something. I'll look for them if you are serious.

Email me.