rear window pickup removal
07-02-2008, 11:59 AM
#1
Registered User
Thread Starter
Join Date: Dec 2004
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
rear window pickup removal
Hey guys. I'm going to be switching from a solid window to a slider window for my 86 pickup. This will be my first solid window that I've ever removed. I have the fsm for instructions but I'm looking for any tips that would be helpful so I won't break anything taking it off and putting it on. I've searched and couldn't find much.
thanks
thanks
Last edited by cunninglinguist; 07-02-2008 at 12:42 PM.
07-02-2008, 01:22 PM
#4
Registered User
Join Date: Feb 2006
Location: Barrie, Ontario CANADA
Posts: 1,730
Likes: 0
Received 0 Likes
on
0 Posts
Why do people give advice when they do not know what they are talking about crews462????? Just pop it out with a screw driver and you hand. Very easy. Don't cut the gasket like crew said.
07-02-2008, 10:22 PM
#6
its not hard at all. i did the opposite of you (slider to solid) and used the FSM and had it done in less then and hour. only trouble i had was at the bottom corners. i had to use a flathead screwdriver to carefully pry the gasket up enough to pull the rope past the bend. after that it went real quick. also make sure you have a buddy to help hold the window up on the outside while you work the inside.
Thread
Thread Starter
Forum
Replies
Last Post
voiddweller
86-95 Trucks & 4Runners (Build-Up Section)
19
05-02-2016 09:10 PM
