need opinions on getting road worthy
#1
Registered User
Thread Starter
need opinions on getting road worthy
alright so i got 600 bucks to get this truck running and on the road, some things i need, a cab -100 and ive already got the clutch , and a front end kit (tie rods, pitman and idler)-100 ordered marlins shifter seat, and in the processs of fixing a bent valve, whenever it gets here, got the oil for the oil change...
truck allready has new wheel bearings both sides, brakes are good, new slave cyl other than the bent valve motor runs perfect...with that being said what els would you guys check and possibly replace if you were to start driving your trail rig...??any help would be appreciated!! this is just to get her road worthy, dont wanna spend the money if i dont have to, so i cant get any cool stuff thanks
truck allready has new wheel bearings both sides, brakes are good, new slave cyl other than the bent valve motor runs perfect...with that being said what els would you guys check and possibly replace if you were to start driving your trail rig...??any help would be appreciated!! this is just to get her road worthy, dont wanna spend the money if i dont have to, so i cant get any cool stuff thanks
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Vendors Build-Ups (Build-Up Section)
14
06-11-2017 08:36 PM
Swampwalker
95.5-2004 Tacomas & 96-2002 4Runners
5
10-12-2015 09:49 AM
potatopants
95.5-2004 Tacomas & 96-2002 4Runners
4
09-15-2015 06:26 AM
larrys93pickup
86-95 Trucks & 4Runners
2
09-06-2015 06:37 AM