My Mechanic Screwed me on my 22RE-C Rebuilt Motor. HELP?
#24
and if you want a new block id hit up http://www.atk-engines.com/ the company that makes their 22's was previously known as orient engines that had a very good rep, come with a better warranty than jasper, and should cost less.
Be careful. The warranty may just cover the parts, not the labor to R&R it. If you can afford it, I recommend having it rebuilt at a local shop, where you can visit and inspect while they're doing the job.
#26
Registered User
Join Date: Mar 2009
Location: Kona, Hawaii
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
stifun.
what the hell did this good friend of da family use to rebuild this engine with? paint??
i'm sorry but $2k is alot of money, especially in these hard times.
everybodys got good suggestions on rebuilt motors with warranties. check them out.
otherwise, your engine is probably a good candidate for a core as far as i know.
& try to find all the receipts for the parts ect. & take some legal action. its probably the only way to get some of that money back, legally.
Mike
what the hell did this good friend of da family use to rebuild this engine with? paint??
i'm sorry but $2k is alot of money, especially in these hard times.
everybodys got good suggestions on rebuilt motors with warranties. check them out.
otherwise, your engine is probably a good candidate for a core as far as i know.
& try to find all the receipts for the parts ect. & take some legal action. its probably the only way to get some of that money back, legally.
Mike
#27
Registered User
Join Date: Dec 2002
Location: Tacoma Wa.
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
#29
Contributing Member
$2000 before it was even done , sorry man you just dont do that .
For that kind of money and being a friend of the family he should have rebuilt it and installed it , once running then hand over the money .
Now , really, just cross your fingers and hope it turns out ok.
Like others have said you would have to take it apart to really check it.
Good Luck !!!
For that kind of money and being a friend of the family he should have rebuilt it and installed it , once running then hand over the money .
Now , really, just cross your fingers and hope it turns out ok.
Like others have said you would have to take it apart to really check it.
Good Luck !!!
#30
Registered User
Thread Starter
Join Date: Feb 2009
Location: Texas
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Well the good news is my mechanic finally decided to show up and finished the job installed the motor and its running and idles great. Now how do I know if he really did a good job on the build should I have a compression test done or what. So far at least I am not out on 2K as the truck is running and I will keep my fingers crossed to see if this motor last.
Thread
Thread Starter
Forum
Replies
Last Post
jasonty
Pre 84 Trucks (Build-Up Section)
41
12-23-2018 01:00 PM