isr mod :)
10-11-2009, 09:24 AM
#1
Registered User
Thread Starter
Join Date: Sep 2009
Location: RI
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
isr mod :)
just did the isr mod on my 90 3vze slug. Couldn't be happier with a free mod!!! Just had en explorer intake tube laying around and made it fit lol What a difference in torque! also cured my high speed sputter! (isr was cracked underneath and couldn't see it until it was removed.
10-12-2009, 01:45 PM
#4
Registered User
Thread Starter
Join Date: Sep 2009
Location: RI
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
heres a cellphone pic. no digital camara 
The intake tube is off of a 2000 explorer v8 iirc.
Took some stretching lol also needed two of the silicone spacers you can get with parts store cone filters to make them fit different size intake tubes.
Had all this lying around so I figured a free and factory appearing (for anyone who doesn't know our trucks down to the last bolt) mod would be a great thing
The intake tube is off of a 2000 explorer v8 iirc.
Took some stretching lol also needed two of the silicone spacers you can get with parts store cone filters to make them fit different size intake tubes.
Had all this lying around so I figured a free and factory appearing (for anyone who doesn't know our trucks down to the last bolt) mod would be a great thing
but then again, those are made by FIAA, not Ford 
Thread
Thread Starter
Forum
Replies
Last Post
TheBFA
Solid Axle Swaps, All Years
8
02-15-2020 06:55 AM
voiddweller
86-95 Trucks & 4Runners (Build-Up Section)
53
02-01-2016 05:46 AM
