NuWaveJedi

Does anyone know how to fasten the fuel pressure tester to a 92 4 Runner 3VZ-E, as well as the best way to do a fuel pressure test? Any insight on tools, fastening, and or techniques would be cool!
Thank You Sirs,
NWJ

sb5walker

Probably any of the Actron fuel pressure testers would do the job - but you'll need the correct banjo fitting. I THINK it's the 8mm one, but I haven't done the job so hopefully someone who has will pipe up. Here's an affordable Actron from amazon:
http://www.amazon.com/Actron-CP7818-...dp/B0006V2BI2/
You'll need to get the banjo fitting from Actron - I've read that they are fairly good about shipping things out. The fittings are listed as accessories for a more expensive tester but they used to be listed on the page for the cheaper tester, and I'm 95 percent sure the fitting works with both:
http://www.actron.com/product_detail.php?pid=16173
It's the "Banjo Bolt M8*1.0" listed on the left - again, get confirmation from somebody before you buy it; if no one posts here, maybe someone at Actron would know. I think it looks like the attached photo.

The steps for the test are here:
http://personal.utulsa.edu/~nathan-b...87fuelpump.pdf

A couple diagrams that may be helpful:
http://personal.utulsa.edu/~nathan-b...89fuelpres.pdf
http://personal.utulsa.edu/~nathan-b...90injector.pdf

Please post back with feedback on doing the test. A write-up would be even better.