yep coolant is full still have the same problem


Thanks tho

Jeff

 

hmm im all out of ideas

 

have you tried to repalce the o ring on your idle screw. count how many threads you unthread it and write it down. It probably looks like a square seal but it is not, it is an o ring that is most likely worn and causing an air leak. find a o ring that fits and seals tight before you put the screw back in put a few drops of blue loctite on it. it will seal the air leak and keep it from moving in and out on you. hope this helps Joe

 

if you want you could run down to autozone and see if its throwning codes

 

I'll keep you posted on what I find.

Thanks Guys for all your help

Jeff