header technical help
#1
Registered User
Thread Starter
Join Date: Jun 2006
Location: Corvallis Oregon OSU
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
header technical help
well i am about to order a thorley header and everythign to do my exhuast from summit racing.
One header has a 02 bung on the number 3 tube. I know this is not optimal as it doesnt take the average of all cylinders.
Am i better of buying the one without the sensor bung and welding in a bung in my exuast right after the flange?
I am thinking option 2 is better but i dont think my current 02 sensor wire will reach. If i remember correctly LCE had a extension wire but i cant seem to find it on there website anyone know about this or if the wire will actually reach to the end of a thorley header?
One header has a 02 bung on the number 3 tube. I know this is not optimal as it doesnt take the average of all cylinders.
Am i better of buying the one without the sensor bung and welding in a bung in my exuast right after the flange?
I am thinking option 2 is better but i dont think my current 02 sensor wire will reach. If i remember correctly LCE had a extension wire but i cant seem to find it on there website anyone know about this or if the wire will actually reach to the end of a thorley header?
#7
Registered User
Thread Starter
Join Date: Jun 2006
Location: Corvallis Oregon OSU
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
ya thats what i am leaning towards. Now if soemoen will chime in with a 02 sensor bung after the collector and tell me if there 02 reached or they had to buy a extension i will be good to go
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
TheBFA
Solid Axle Swaps, All Years
8
02-15-2020 06:55 AM
FS[PacNorWest]: 1987 4Runner SAS, 22RE, 5Spd, Dual Cases, etc
toyotasaurus
Vehicles - Trailers (Complete)
0
09-24-2015 03:30 PM
DiggnDeep
84-85 Trucks & 4Runners
4
09-03-2015 02:45 PM