Fender clean up after a cut and inner fender question

Reply Subscribe

Thread Tools

Search this Thread

Mar 30, 2011 | 09:27 AM

#21

corax

Registered User

Joined: Aug 2007

Posts: 1,133

Likes: 7

From: PDX

If you're moving to Washington anytime soon, ToyotaFiberglass.com is only 1 hour into Canada along Hwy 97

Slacker to started a thread on installing these quarter panels here

Mar 30, 2011 | 10:19 AM

#22

BigBluePile

Contributing Member

iTrader: (3)

Joined: Dec 2006

Posts: 15,191

Likes: 190

From: Sedro-Woolley, WA

Quote:

Originally Posted by Junkers88

Got some cutting done and you really can't tell from the side that anything has been cut (which makes me pretty damn happy) I did a little flexing and there is one spot on the front that still rubs but I'm going to need another set of eyes to find it. As far as the rear goes I re-beat the welds a little and flexed it and the axle seems to move up and towards the rear a little as it compresses. So far I'm clearing the front of the rear fender by about 1/4". If it does end up hitting when I wheel it then I'll relocate the axle back an inch and see if that does the trick.

Thank ya'll for all the help.

Actually, you'll have to move the rear axle forward due to spring compression and shackle swing.....