Engnbldr isn't selling parts HELP
#1
Engnbldr isn't selling parts HELP
Where can u buy a quality 22re head?
lce wants $400 plus shipping for stock replacement
dnj products offers one on ebay for $220 ish
dnj is also iso certified
also need a cam similar to engnbldr 270 430
anyone have any advice or input?
have the Chinese heads improved over the past few years? I've researched for days and I'm still unable to make a decision
thanks in advance
lce wants $400 plus shipping for stock replacement
dnj products offers one on ebay for $220 ish
dnj is also iso certified
also need a cam similar to engnbldr 270 430
anyone have any advice or input?
have the Chinese heads improved over the past few years? I've researched for days and I'm still unable to make a decision
thanks in advance
#2
Registered User
I'm not sure if engnbldr machines or changes parts in shop to their "stock" heads, but I bought one a couple years ago and it had a DNJ logo laser-etched on it. It might be exactly the same product, who knows? Anyway, mine has been great for 11k miles and I see no reason it won't last. To my eye the casting looked as good as the OEM one.
Last edited by gsp4life; 02-14-2018 at 02:51 PM. Reason: Typo
#3
Registered User
iTrader: (1)
Just how bad is your head ??
Just what year are you tinkering with??
Engine Builder Most likely everyone has the Flu
Myself I would wait but you gotta do what you need to .
I trust anything from them over anyone else
For $400.00 you should be able to get it rebuilt
Used head rebuilt ??
Did Chinese products get better ??
Depends how long ago the last quality control inspector was shot .
Give them another 20 or 30 years they might get it together
One can have the latest knock off CNC tooling and still make junk
Just what year are you tinkering with??
Engine Builder Most likely everyone has the Flu
Myself I would wait but you gotta do what you need to .
I trust anything from them over anyone else
For $400.00 you should be able to get it rebuilt
Used head rebuilt ??
Did Chinese products get better ??
Depends how long ago the last quality control inspector was shot .
Give them another 20 or 30 years they might get it together
One can have the latest knock off CNC tooling and still make junk
#4
I'm assuming he uses bare dnj castings and puts them together. From what understand from emails his son is taking care of his sick mother and is out of town. He said months wait time. A couple weeks I could do. Not months
My head is trashed journals are scored and has been shaved 2 times its the end of the road for it
My head is trashed journals are scored and has been shaved 2 times its the end of the road for it
Last edited by 22reazy; 02-14-2018 at 03:46 PM.
#6
Registered User
I ended up keeping my old head since it passed the pressure test.
Maybe email them with your phone number and have them call you back. They have a couple email addresses listed but the one I got a response from was engnbldr@engnbldr.com
Trending Topics
#11
Registered User
Thread
Thread Starter
Forum
Replies
Last Post
Mud-Runner
Newbie Tech Section
9
04-03-2012 11:16 PM
taikowaza
86-95 Trucks & 4Runners
17
10-30-2006 03:58 PM