custom speaker door panel
#1
Registered User
Thread Starter
custom speaker door panel
I made some custom door panels out of fiber glass for my 1991 toyota 4 runner. I used a cardbord template for the part that goes on the door. I made the frame out of 3/4 inch MDF bord cut streched a cheap piece of white T- shirt over the frame to get the conture that i wanted. then i put a coat of resin on. after that hardend some fiberglass mat with a lot of resin. then started sanding. . . . and came up with somthing like the lower panel in this picture.
the top panel has a coat of duplacolor truck bed liner on it. after a lot of sanding and a little paint, i got this. . .
way better than my stock dash speakers.
the top panel has a coat of duplacolor truck bed liner on it. after a lot of sanding and a little paint, i got this. . .
way better than my stock dash speakers.
The following users liked this post:
RAD4Runner (07-04-2019)
Thread
Thread Starter
Forum
Replies
Last Post
jasonty
Pre 84 Trucks (Build-Up Section)
41
12-23-2018 01:00 PM