looking for photos of your after market air cleaners on stock aisin carbs. . And what and where you got your adapters from. And if you had to do any hood mods to make it clear. thanks.

I know LCE has the aisin adapters to fit. any others to mention?

 

im lookin for the same thing, and poss pics of linkages

 

Gnarly stacked two air filters..

I just did this too..

https://www.yotatech.com/forums/f116...42/index3.html

 

It's an idea, however gives me an idea of how much clearance is under the hood. Assuming he did that without a body lift.

 

I did it on my rig last week no clearance issues

but it is a bit louder then before and I am going back to the stock conifiguration

 

Heres my setup......



LC Engineering carb adapter with their 11x2 K&N air filter and air cleaner assembly. No hood clearance problems, but a couple of vacuum lines had to be plugged and the factory wingnut stud had to be changed out to a longer one that comes in the kit. I definitely noticed a better throttle response, but now I can really hear the intake. And it sounds really wierd

 

were there any noticeable power gains?

 

god i can hardly feel any suction on the carb... i thought about intake mods for it but i cant feel much of a draft anyway. and changing out dirty to clean airfilters i never notice a difference. Mines brown right now, as usual before i swap in a new one.. but i never can tell anyway