Caling all St. Pete manual trans experts
04-05-2007, 09:00 AM
#1
Registered User
Thread Starter
Join Date: Aug 2004
Location: St. Pete., FL/Deltona, FL
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Caling all St. Pete manual trans experts
Is there any one in the area than can take a look at my tranny for me. It's a W56 series and it is in pieces in the back of my truck. Some a** clown was trying to rip me off so I picked up my truck from his shop and brought it back home before he could inflict further damage. I would like to rebuild it, but don't really have the knowledge or tools, but I would like to learn. I'm going to pick up a used one in the meantime and if someone could help me install it that would be great, too. PM me here on the board.
TIA,
Elaine
BTW, if you're anywhere even close to central FL I would be willing to bring the tranny to your location. I'll be more than happy to compensate with food and drink of choice to anyone that can give me a hand.
TIA,
Elaine
BTW, if you're anywhere even close to central FL I would be willing to bring the tranny to your location. I'll be more than happy to compensate with food and drink of choice to anyone that can give me a hand.
Last edited by Tiger Paw; 04-05-2007 at 09:02 AM.
04-05-2007, 09:08 AM
#2
Registered User
Join Date: Jun 2006
Location: Spokane Valley Washington
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
Needless to say I'm no where near Florida. But you might start with a FSM, factory service manual.
Their on ebay at times, or maybe a local dealer would sell you a used one for cheap.
Their on ebay at times, or maybe a local dealer would sell you a used one for cheap.
04-05-2007, 09:16 AM
#3
Registered User
Thread Starter
Join Date: Aug 2004
Location: St. Pete., FL/Deltona, FL
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
I've been watching Ebay lately for one, but no luck. I don't mind using a manual, but sometimes I need to ask questions or watch somebody do something in order to understand it fully. No matter how much I talk the manual just sits there speechless. 
04-05-2007, 09:18 AM
#4
Registered User
Join Date: Jun 2006
Location: Spokane Valley Washington
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
I've bought used manuals from this dealer, Alton Toyota/Dodge.
www.altontoyota.com
Send them an e-mail and ask if they have one.
edit: They are kinda slow to respond so be patient, but they are good to deal with.
www.altontoyota.com
Send them an e-mail and ask if they have one.
edit: They are kinda slow to respond so be patient, but they are good to deal with.
Last edited by Ringmaster; 04-05-2007 at 09:28 AM.
04-05-2007, 09:27 AM
#5
Contributing Member
Join Date: Apr 2006
Location: TENN Native Languishing in Virginia
Posts: 4,787
Likes: 0
Received 34 Likes
on
14 Posts
Save yer money; print them off online: http://www.toyotanation.com/forum/t99418.html
Trending Topics
04-05-2007, 09:32 AM
#8
Registered User
Thread Starter
Join Date: Aug 2004
Location: St. Pete., FL/Deltona, FL
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
04-06-2007, 03:54 AM
#10
Registered User
call drew at 727-937-7800 he is in tarpon springs and he is a jobber for, downey,lc engineering,he lives and breaths toyotas. tell him tom with the 86 turbo truck sent you please.
Thread
Thread Starter
Forum
Replies
Last Post
jasonty
Pre 84 Trucks (Build-Up Section)
41
12-23-2018 01:00 PM
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
07-10-2015 06:21 PM
