Cab Mount Measurement Request
Aug 29, 2010 | 02:53 PM
#1
Thread Starter
Registered User
Joined: May 2010
Posts: 16
Likes: 0
Cab Mount Measurement Request
Can anyone measure there truck or frame, I need the distance of the middle cab mount to the rear cab mount on a 3rd gen extended cab, center to center of the holes would be great!
Thanks ahead of time!
Thanks ahead of time!
Aug 29, 2010 | 03:20 PM
#2
Registered User
Joined: Aug 2009
Posts: 13,574
Likes: 72
From: Wilkes-Barre, PA, USA
just an FYI asking for measurements on here doesn't go very well. Especially without an explanation of what you are trying to do or why you aren't doing the measurement yourself. This is speaking from personal experience as well.
x2 on that!
Aug 29, 2010 | 03:26 PM
#4
Registered User
Joined: Jan 2007
Posts: 6,106
Likes: 27
It's in the FSM. Page BO-47 & BO-61, says 1572mm(61.89").
http://personal.utulsa.edu/~nathan-b...13bodydime.pdf
Your welcome!
http://personal.utulsa.edu/~nathan-b...13bodydime.pdf
Your welcome!
Last edited by MudHippy; Aug 30, 2010 at 02:32 PM.
Aug 29, 2010 | 03:33 PM
#5
Registered User
Joined: Aug 2009
Posts: 13,574
Likes: 72
From: Wilkes-Barre, PA, USA
I am thinking it has something to do with his first post
nice find MudHippy, woulda never though something like that woulda been in the FSM.
nice find MudHippy, woulda never though something like that woulda been in the FSM.
To bring this thread back from the dead, I recently purchased this truck, it found it's way up to Canada.
Previous owner crashed it, tweaked the frame and the cab a tiny bit.
Pulling the cab and doing a frame swap, also truck now has a HX35 on it, assuming the twins died on a previous owner at one time.
Previous owner crashed it, tweaked the frame and the cab a tiny bit.
Pulling the cab and doing a frame swap, also truck now has a HX35 on it, assuming the twins died on a previous owner at one time.
Aug 29, 2010 | 09:26 PM
#6
Thread Starter
Registered User
Joined: May 2010
Posts: 16
Likes: 0
Thanks for the link, I as well never thought of checking the fsm.
Long storey short, rebuilding a extra cab that was tweaked fairly badly, I'm swapping it all to a 2nd gen swb frame that i've lengthened 10 1/4 inches but I didn't have anything to accurately measure the rear cab mounts by, didn't really trust my cab to measure from as the cab holes got enlarged from when it was crashed...
Long storey short, rebuilding a extra cab that was tweaked fairly badly, I'm swapping it all to a 2nd gen swb frame that i've lengthened 10 1/4 inches but I didn't have anything to accurately measure the rear cab mounts by, didn't really trust my cab to measure from as the cab holes got enlarged from when it was crashed...
Last edited by boosted7; Aug 29, 2010 at 09:28 PM.
Thread
Thread Starter
Forum
Replies
Last Post
priest16
84-85 Trucks & 4Runners (Build-Up Section)
15
Aug 6, 2015 07:43 AM
