Blue-94 4Runner Build
10-18-2009, 02:15 PM
#1
Registered User
Thread Starter
Join Date: May 2009
Location: Central Florida
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Blue-94 4Runner Build
Yeah so i decided to start a build thread after a few mods to the truck.
Sig for details
i was going to use this for my avatar here but it was too big
To come: Exhaust, paint the rims, tint, blackout lights, level the back and a rear locker soon. Tires down down the road.
ISR mod a while ago
Cut the catalytic converter off a few weeks later. Made the biggest difference. Planning on a high flow when I get the exhaust done.
New distributor cap last month. The rotor had started to eat into the plastic of my old one. Im amazed and how well it was running.
Put some F150 horns on earlier today. Now I dont sound like the road runner.
Aisin hubs are in the mail.
Sig for details
i was going to use this for my avatar here but it was too big
To come: Exhaust, paint the rims, tint, blackout lights, level the back and a rear locker soon. Tires down down the road.
ISR mod a while ago
Cut the catalytic converter off a few weeks later. Made the biggest difference. Planning on a high flow when I get the exhaust done.
New distributor cap last month. The rotor had started to eat into the plastic of my old one. Im amazed and how well it was running.
Put some F150 horns on earlier today. Now I dont sound like the road runner.
Aisin hubs are in the mail.
Last edited by Grunnen; 10-18-2009 at 02:16 PM.
10-18-2009, 02:31 PM
#2
Contributing Member
Nice 
still look'n for ya ride'n around here
lmao at the avatar idea, but why wont it work? It meets the requirements; has to be less than 160x160 pixels, and less than 48.8 kb. Your animation there is only 140x140 pixels and 28 kb
still look'n for ya ride'n around here
lmao at the avatar idea, but why wont it work? It meets the requirements; has to be less than 160x160 pixels, and less than 48.8 kb. Your animation there is only 140x140 pixels and 28 kb
10-18-2009, 09:14 PM
#4
Registered User
Thread Starter
Join Date: May 2009
Location: Central Florida
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
and thats my current avatar but yotatech doesnt support animations
no clue. the one close to the throttle body goes to the head and the one towards the AFM goes to the radiator.
Last edited by Grunnen; 10-18-2009 at 09:16 PM.
The grass is always greener I guess.
Trending Topics
12-07-2009, 08:31 PM
#8
Registered User
Thread Starter
Join Date: May 2009
Location: Central Florida
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Put some Aisin manual hubs I bought off of Homeless dog & truck a few months ago.
took a dremel to the stock plastic wheel caps so they would fit around the hubs.
After I cut my cat off it blew my muffler out, so I got a 2 1/4 Borla Pro XS from a local speed shop a few days ago and installed it tonight in the dark. I went from the O2 sensor back with 2 1/4, I scraped everything after the muffler and put a turndown a few inches before the axle. It sounds amazing and was totally worth it. I dont know if anyone else had a problem with exhaust fumes coming in the back window while in traffic but it killed me. I think this solved my problem. Ill post pictures tomorrow.
took a dremel to the stock plastic wheel caps so they would fit around the hubs.
After I cut my cat off it blew my muffler out, so I got a 2 1/4 Borla Pro XS from a local speed shop a few days ago and installed it tonight in the dark. I went from the O2 sensor back with 2 1/4, I scraped everything after the muffler and put a turndown a few inches before the axle. It sounds amazing and was totally worth it. I dont know if anyone else had a problem with exhaust fumes coming in the back window while in traffic but it killed me. I think this solved my problem. Ill post pictures tomorrow.
Last edited by Grunnen; 12-07-2009 at 08:36 PM.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
XtraCab
Solid Axle Swaps, All Years
18
04-12-2020 05:25 AM
